KRAVE ARB Twin Compressor Mount for Tacoma, Land Cruiser 250 & 4Runner
Onboard air is one of those upgrades that quickly proves its value. It lets you air down for the trail, bring your tires back to road pressure afterward and make pressure adjustments without unpacking a portable compressor every time.
The challenge is finding a secure place for a compressor inside the tightly packed engine bay of a modern Toyota.
The KRAVE ARB Twin Compressor Mount provides a clean under-hood mounting solution for the 2024+ Toyota Tacoma, 2024+ Land Cruiser 250 and 2025+ Toyota 4Runner. Built from stainless steel, the complete kit securely mounts an ARB Twin Compressor while keeping the air chuck, switch, hose and wiring organized.
Instead of sourcing individual brackets, hardware and extensions, you get a complete system designed to work together.
Why Install an ARB Twin Compressor Under the Hood?
Portable air compressors work, but they take up cargo space and must be unpacked, connected and stored again whenever you use them.
An under-hood ARB Twin Compressor stays with your vehicle and is ready when you need it. Once installed, you can connect your inflation hose, turn on the compressor and begin airing up.
A permanent onboard-air system offers several practical advantages:
-
Keeps the compressor out of your cargo area
-
Creates a clean and organized installation
-
Provides quick access to the switch and air chuck
-
Reduces the amount of loose equipment you need to pack
-
Keeps onboard air ready for every trail day
-
Provides a foundation for additional air accessories
Engine-bay space is limited on the latest Toyota platforms. A vehicle-specific ARB Twin Compressor mount uses that space efficiently and gives each part of the system a proper location.
Designed for the New Toyota Platform
The 4th Gen Tacoma, Land Cruiser 250 and 6th Gen 4Runner share Toyota’s newest truck platform, but installing aftermarket equipment under the hood can still be challenging.
Available space is tight, wiring routes matter and hybrid models require a different approach to power distribution.
The KRAVE ARB Twin Compressor Mount is designed for:
-
2024+ Toyota Tacoma, all trims
-
2024+ Toyota Land Cruiser 250
-
2025+ Toyota 4Runner, all trims
The bracket positions the compressor securely inside the engine bay while maintaining a clean, intentional appearance. Instead of adapting a universal mounting plate, the system is sized specifically for the vehicle and ARB Twin Compressor application.
Stainless Steel Construction for Canadian Conditions
An engine-bay compressor mount must support the weight of the compressor while handling vibration, heat, moisture and changing temperatures.
Canadian vehicles also face winter road salt, which makes corrosion resistance especially important.
The KRAVE ARB Twin Compressor Mount features fully stainless steel construction for long-term durability. The formed bracket provides a solid foundation for the compressor while making efficient use of the available engine-bay space.
It is a practical mounting solution built for year-round use, whether your Toyota is a daily driver, work vehicle or dedicated adventure build.
More Than Just a Compressor Bracket
The mounting bracket is only one part of a clean onboard-air installation.
Hose length, wiring reach, switch placement, air-chuck location and mounting hardware can all slow down an installation when the components are sourced separately.
The KRAVE kit brings those pieces together.
What’s Included
-
Stainless steel mounting bracket sized for an ARB Twin Compressor
-
Dedicated air chuck and switch mounting bracket
-
High-quality air hose rated for high pressure
-
Vehicle-specific hose length
-
Wiring harness extension
-
Required mounts and installation hardware
The kit is pre-assembled where possible to make installation more straightforward. Each component has been selected and tested to work as part of the complete system.
Please note: The ARB Twin Compressor and air chuck are sold separately.
Installing the KRAVE ARB Twin Compressor Mount
The kit removes much of the guesswork from the installation, but the process still involves mechanical mounting, air-line plumbing and 12-volt electrical work.
Moderate DIY experience or professional installation is recommended.
The general installation process includes:
-
Preparing the engine-bay mounting area
-
Positioning and securing the stainless steel bracket
-
Mounting the ARB Twin Compressor
-
Installing the air chuck and switch bracket
-
Routing the supplied high-pressure air hose
-
Extending and routing the compressor wiring harness
-
Connecting power and testing the complete system
The included wiring extension helps create a clean power connection. On applicable models, power can be routed to the starter battery. Hybrid vehicles can use the main power stud located under the hood.
Always follow the installation instructions and confirm that your electrical and air-line connections are secure before operating the compressor.
For a closer look at the complete process, watch our ARB Twin Compressor Mount installation video.
Why Choose an ARB Twin Compressor?
ARB has earned a strong reputation for building dependable onboard and portable air compressors.
Its Twin Compressor platform is designed for drivers who need more air output for larger off-road tires, repeated pressure adjustments and demanding applications.
ARB’s newer Brushless series adds several upgrades to the existing platform, including:
-
Brushless electric motors
-
Built-in fans for active cooling
-
Smart electronic control
-
Increased air output
-
Compatibility with existing ARB air accessories
-
Compatibility with ARB hose kits and Air Lockers
ARB reports that its Brushless compressors provide up to 50 percent more air output than its previous leading compressor range.
That increased output means less time waiting at the trailhead and more time exploring.
You can pair the KRAVE mount with the ARB CKBLTA12 Brushless Twin Motor 12V Air Compressor.
Complete Your Onboard-Air System
The mount and compressor form the foundation of your onboard-air system, but you will also need a reliable way to connect the compressor to your tires.
For a straightforward single-tire setup, the ARB Compressor Pump Up Kit V2 provides the hose and accessories needed to begin inflating your tires.
Drivers looking for a faster multi-tire system can pair their onboard compressor with a MORRFlate tire inflation kit. MORRFlate systems allow you to inflate, deflate and equalize the pressure in multiple tires at the same time.
Available options from KRAVE include:
- MORRFlate Duo 2-Tire Inflation Kit, which connects to two tires at once and includes a built-in pressure gauge
- MORRFlate Quad 4-Tire Inflation Kit, which connects to all four tires for simultaneous inflation, deflation and pressure equalization
- Shop all MORRFlate tire inflation kits to find the correct hose length and configuration for your vehicle
Built for a Clean, Complete Installation
A good accessory installation should look intentional. It should keep components secure, provide convenient access and make proper use of the available space.
The KRAVE ARB Twin Compressor Mount was developed with those goals in mind.
Its stainless steel construction provides a durable foundation for the compressor. The included hose, wiring extension, air chuck and switch bracket, mounts and hardware bring the complete installation together.
For Tacoma, Land Cruiser and 4Runner owners who regularly air down, explore remote routes or simply want dependable air available at the vehicle, this kit offers a clean way to add an ARB Twin Compressor to the build.
Shop the KRAVE ARB Twin Compressor Mount
Need help confirming fitment or selecting the rest of your onboard-air system? Contact KRAVE Automotive and our team can help you build the right setup for your Toyota.
Frequently Asked Questions
What vehicles fit the KRAVE ARB Twin Compressor Mount?
The mount fits all trims of the 2024+ Toyota Tacoma, the 2024+ Toyota Land Cruiser 250 and all trims of the 2025+ Toyota 4Runner.
Does the mount include an ARB Twin Compressor?
No. The ARB Twin Compressor and air chuck are sold separately. KRAVE offers the ARB CKBLTA12 Brushless Twin Compressor and ARB Compressor Pump Up Kit V2 separately.
What comes with the compressor mount?
The kit includes the stainless steel compressor bracket, an air chuck and switch bracket, high-pressure air hose in the correct length for the vehicle, a wiring harness extension, mounts and installation hardware.
Does the mount work with hybrid Toyota models?
Yes. The included wiring kit allows power to be routed to the main under-hood power stud on hybrid models.
Can I install the compressor mount myself?
Someone comfortable with basic mechanical work, air-line plumbing and 12-volt electrical connections should be able to complete the installation. Moderate DIY experience or professional installation is recommended.
Where does the ARB Twin Compressor mount?
The KRAVE bracket secures the ARB Twin Compressor inside the engine bay. This keeps it out of the cargo area and ready to use as a permanent onboard-air system.
