Dobinsons Sway Bar Relocation Kit Toyota Tacoma/ 4Runner/ FJ Cruiser/ Lexus GX 470 - SE59-524K

Dobinsons Sway Bar Relocation Kit Toyota Tacoma/ 4Runner/ FJ Cruiser/ Lexus GX 470 - SE59-524K

This Tacoma sway bar drop bracket kit includes 2 machined aluminum spacers and necessary hardware to space down the stock sway bar on 2005-2023 Toyota Tacoma models, 2003-2009 4th Gen 4Runner, 2006-2009 FJ Cruiser and Lexus GX470, putting it back to a proper working angle, and allowing each wheel to once again move more freely.  These are a good idea to add when a vehicle is lifted 2″ or more to correct the sway bar angle.  At 3″ or more, these should most definitely be added.

Instructions are simple on this Tacoma Sway bar Relocation Kit.  Undo the stock sway bar mounts where it attaches to the frame.  Place the Tacoma Sway bar drop spacer between the sway bar mount and the frame, and reattach the sway bar with the new supplied longer hardware, and you’re done.

Some people think this is done to keep the sway bar from contacting the strut assembly.  That is not the case with all Dobinsons front struts including twin tube, IMS, and MRR or MRA strut assemblies.  This is simply to reposition the sway bar back to a better working angle.  A high angle sway bar can actually hold up the front suspension and restrict the movement of one side or the other due to the higher working angle.  This Tacoma Drop Bracket Kit helps alleviate that issue.

• Lowers the stock front sway bar for better working angle
• Includes machined aluminum spacers
• Easy bolt-on installation
• Includes new correct grade longer hardware
• Recommended for lift heights of 2″ or more

Fits Vehicles:

 2005-2023 Toyota Tacoma 4×4 models, 2003-2009 4Runner 4th Gen, 2006-2009 FJ Cruiser, Lexus GX470 (all years without KDSS)