AEV EX Front Bumper - 2018+ JL Wrangler  2019+ JT Gladiator
AEV EX Front Bumper - 2018+ JL Wrangler  2019+ JT Gladiator

AEV EX Front Bumper - 2018+ JL Wrangler 2019+ JT Gladiator

SKU: 12301200AA

Regular price$2,510.00
/
Shipping calculated at checkout.


0 in stock

AEV EX FRONT BUMPER - JL Wrangler / Gladiator

The AEV EX Front Bumper for JL Wrangler / Gladiator raises the bar for front end protection with a host of innovative design features and manufacturing processes that truly set it apart from the rest – even the factory steel winch bumper. Designed, tested, and manufactured in the USA, the AEV EX Front Bumper provides an unrivaled level of functionality, style, and protection for your Jeep.

In North America, Rubicon and Mojave (JT) models came with a "high" fender flare option that allows for more tire clearance. Visually they look similar to the ones used on other models however, these fender flares sit about an inch higher and an inch wider than the standard fender flares found on Sport and Sahara models. Export models may vary depending on the country they were built for.

FULL-WIDTH PROTECTION. SHORT BUMPER CLEARANCE.

The full-width design of the AEV EX Front Bumper offers maximum protection for the vital front suspension components that can often leave a vehicle disabled when damaged in a collision. It also helps direct air up and over the fender flares instead of trapping the air inside the flare, which increases drag and reduces fuel economy. These benefits do not come at the expense of limiting tire size, decreased tire clearance, or approach angle. In fact, the EX Front Bumper sits higher and tighter to the body, giving it a better approach angle than the factory winch bumper.

HOT STAMPED BORON STEEL CONSTRUCTION

The AEV EX Front Bumper is manufactured out of Hot Stamped Boron Steel (HSBS) and features an OE-quality, multi-stage E-coat/powder coat finish for maximum corrosion and UV resistance. Hot Stamped Boron Steel is an ultra-high strength, press hardened steel that is commonly used in automotive applications for passenger impact protection because it is lightweight with an extremely high yield strength. The complete EX Front Bumper weighs approximately 110 pounds, yet it is stronger than a bumper weighing twice as much.

SUPERIOR WINCH ACCESS AND VISIBILITY

What good is a winch bumper if it is difficult to use? The factory winch bumper allows mounting a winch to your vehicle, but the clutch handle can be difficult to access and the winch line visibility when spooling your winch is very poor. The carefully thought-out profile of the EX Front Bumper solves both of these issues, offering plenty of accessibility to the clutch and a better view of your winch line during recovery operations – even with hoop mounted lights!

VISIBILITY OVER ANY TERRAIN

Lighting is a critical component to traveling safely through remote backcountry, so the EX Front Bumper allows for the installation of AEV 7000 Series LED Off-Road Lights underneath the center hoop with the use of the optional Off-Road Light Brackets (sold separately). This allows easy access to the winch and its components. All various OEM fog light options are compatible with the EX Front Bumper and install seamlessly with the supplied brackets and bezel.

If you are looking to maximize light output to illuminate the ground in front of you and help cut through fog, snow, or heavy dust and silt, you can add a 20” lightbar behind our optional Front Bumper Skid Plate (sold separately) using the optional Front Bumper Skid Plate Light Mount (sold separately).

Additionally, a Trail Cam Relocation Kit is available to relocate the camera to underneath the center hoop for an unobstructed view of the trail head.

READY FOR ANYTHING

The AEV EX Front Bumper is up for any recovery task that may present itself, with two Hi-Lift Jack guides and a pair of heavy-duty, chassis-mounted recovery points that are tested to meet all OE load specifications and are appropriately sized for ¾” anchor shackles. A 10,000lb Warn Zeon 10-S winch (or other similarly sized winches) can be added to the EX Front Bumper with the use of our optional Winch Mount. An Optional Non-Winch Cover Plate is available for customers who don’t plan on installing a winch and wish to cover up the winch opening.

PROUDLY MADE IN THE USA

AEV is committed to US manufacturing to bring you the best quality, materials, and craftsmanship. The multi-stage e-coat/powder-coated AEV EX Front Bumper is proudly designed, tested, and manufactured right here in the USA and carries a lifetime structural warranty and a 1-year warranty against corrosion – both applicable to the original purchaser and from the original date of purchase.

 KEY FEATURES:

  • Fits JL Wrangler/Gladiator
  • Full-width corner protection
  • Satin Textured Black
  • Modular design allows for additional corner configurations
  • Hot-Stamped Boron Steel (HSBS)
  • Compatible with Warn Zeon winches
  • Roto-molded hoop assembly
  • Compatible w/ OEM fog lights and a pair of 7″ Off-Road Lights
  • OE-grade E-coat and powder coat finish
  • Front Trail Cam Compatible
  • Made in the USA
  • Fits 2018+ JL 2019+ JT

Installation Guides:

AEV EX/RX Front Bumper Installation Guide for Jeep Wrangler/Gladiator (GEN 2)

IN STORE PICKUP

Orders can be picked up daily, from 10am - 4pm. An email will be sent when your order is ready for pickup.

CANADA WIDE SHIPPING

Orders are generally shipped within 72 hours (Monday - Friday). Due to the complexity of some products, shipping costs will be calculated and due after order is placed.

USA SHIPPING

KRAVE is now offering shipping to the United States on select products. In stock orders generally ship within 72 hours of the next business day. Dependent on the country of origin and value of the product there may be brokerage charges or duties from the shipping company. The customer is responsible for any additional fees incurred during transit.

INTERNATIONAL SHIPPING

If you would like to purchase product's from our store but are outside of North America please send an email to online@kraveautomotive.ca 

SHIPPING DAMAGE

KRAVE and the Original Parts Manufacturer are not responsible for damages incurred during transit. All products and boxes are inspected before they leave KRAVE. If your product's arrives and is damaged you must file a claim with the responsible shipping company.  

© 2023 KRave Automotive

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


Recently viewed