Dobinsons Adjustable 3-Way MRA Front Struts Extended Travel For Toyota 4Runner/ Tacoma/ Fj Cruiser- MRA59-A220

Dobinsons Adjustable 3-Way MRA Front Struts Extended Travel For Toyota 4Runner/ Tacoma/ Fj Cruiser- MRA59-A220

SKU: MRA59-A220

$1,820.00
/
Shipping calculated at checkout.

3 in stock

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Frequently Purchased Together /// Add On's

Dobinsons Adjustable 3-Way MRA Front Struts Extended Travel For Toyota 4Runner/ Tacoma/ Fj Cruiser-  MRA59-A220

Sold as a pair!

These have an adjustable lower coil seat to fine tune lift height or any lean in the vehicle.  Supplied with universal reservoir brackets (custom fitting required).  These do not come with coil springs or top mounts.  They do come with new rubber bushings and required washers for installation.  Select Dobinsons coil springs based on desired lift height and load capacity.  Coil springs are all based on desired lift height, how much weight your vehicle has added over stock, and what type of ride quality you are looking for once it’s all been installed.

  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • Extended Travel – 567mm extended, 417mm compressed
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Bolt-on Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Resi brackets bolt in between the stock front sway bar mount
  • Full 2 year limited warranty, no set rebuild time period
  • Does not include coil springs or top mounts – sold separately

Fits Vehicles :

2003-2009 4th Gen 4Runner, 2006-2009 FJ Cruiser, 2005-2023 Tacoma (2nd and 3rd Gen Tacoma), Lexus GX470

Built on the Back of the Race Winning Monotube Remote Reservoir (MRR) Shock Absorbers, Dobinsons new range of MRR Adjustable Shock Absorbers combine the best in high performance race-bred Monotube Technology, with an all new 3-way dampening adjustment system to turn your 4×4 into the ultimate off-road machine. Each component of the MRR Shock Absorber has been refined and improved to offer a higher level of ride quality, vehicle control and shock absorber performance.

The new 6063 honed Aluminum reservoir, revised light-weight floating piston, Carbon Fiber / PTFE / Disulphide composite wear band, improved 3 stage sealing system, and the ability to run lower gas pressure with the addition of the reservoir compression adjuster; have combined to provide massive reductions in shock absorber friction, resulting in an improved vehicle ride and dampening performance. The revised sealing design now provides a 3 stage FKM-HNBR shaft seal system that, when combined with the reduced operating frictions, provides a vastly increased service life with reduced wear.

The Micro Polished, Hard Chromed and Heat Treated shock shaft, revised CNC aluminum high flow race piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability. The 3 Way adjustment design reduces the main piston working load, distributing heat more evenly between the main piston and the reservoir piston for reduced operating temperatures, and allows quick and easy damping changes for the ultimate in shock tunability in varying terrain and vehicle loads, to keep you controlled and comfortable.

The Dobinsons MRA59-A220 Adjustable Remote Reservoir Lift kit utilizes large bores, combined with remote oil reservoirs, provide the perfect housing for an enormous oil capacity and surface area to resist shock fade and maintain vehicle handling.

The Dobinsons MRA59-A220 Features:

10 High Speed Compression Adjustments

20 Low Speed Compression Adjustments

15 Rebound adjustments

What this means is that you are able to tune your suspensions to accurately adjust to your current driving conditions. No Tools are needed to adjust the suspensions compression and rebound settings, although the kit does come with a handy tool to reach the adjusters better if needed. The rebound compression on struts is done at the top of the strut, and the rebound adjustment on the shocks is done at the base mount of the shock. The MRA features an easy to adjust knob on the reservoir for high and low speed compression adjustment. Due to the adjustable design there is no longer the need to choose between the firmer and comfort valved shocks, you now have the option to manage your valving on the fly, eliminating the hard choice of weather to buy your suspension based on daily comfort or having suspension heavy duty enough for your hauling needs.

IN STORE PICKUP

Orders can be picked up daily, from 10am - 4pm. An email will be sent when your order is ready for pickup.

CANADA WIDE SHIPPING

Orders are generally shipped within 72 hours (Monday - Friday). Due to the complexity of some products, shipping costs will be calculated and due after order is placed.

USA SHIPPING

KRAVE is now offering shipping to the United States on select products. In stock orders generally ship within 72 hours of the next business day. Dependent on the country of origin and value of the product there may be brokerage charges or duties from the shipping company. The customer is responsible for any additional fees incurred during transit.

INTERNATIONAL SHIPPING

If you would like to purchase product's from our store but are outside of North America please send an email to online@kraveautomotive.ca 

SHIPPING DAMAGE

KRAVE and the Original Parts Manufacturer are not responsible for damages incurred during transit. All products and boxes are inspected before they leave KRAVE. If your product's arrives and is damaged you must file a claim with the responsible shipping company.  

© 2024 KRave Automotive

Recently viewed

Back to Lexus GX470