{"product_id":"drt-fabrication-flat-belly-skid-plate-kit-for-2005-2023-toyota-tacoma","title":"DRT Fabrication Flat Belly Skid Plate Kit for 2005-2023 Toyota Tacoma","description":"\u003ch3\u003eDRT Fabrication Flat Belly Skid Plate Kit for 2005-2023 Toyota Tacoma\u003c\/h3\u003e\n\u003cp\u003eThe DRT Fabrication Flat Belly Skid Plate Kit is a completely new approach to skid plate design for the 2005-2023 Toyota Tacoma, focused on one thing: real ground clearance gains and real world performance. The kit replaces the factory transmission crossmember with a high-clearance unit and a flat belly skid system, gaining approximately 2 inches at the transmission crossmember and up to 4 inches at the transfer case.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved breakover clearance\u003c\/li\u003e\n\u003cli\u003eReduced hang-ups on rocks, ledges, and ruts\u003c\/li\u003e\n\u003cli\u003eSmoother underbody profile\u003c\/li\u003e\n\u003cli\u003eBetter obstacle transition and departure\u003c\/li\u003e\n\u003cli\u003eIncreased confidence in technical terrain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTransmission skid plate\u003c\/li\u003e\n\u003cli\u003eNew high clearance transmission crossmember\u003c\/li\u003e\n\u003cli\u003eTransfer case skid plate\u003c\/li\u003e\n\u003cli\u003eTransfer case crossmember\u003c\/li\u003e\n\u003cli\u003eNecessary hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eApproximately 2\" of clearance gained at the transmission crossmember, up to 4\" at the transfer case\u003c\/li\u003e\n\u003cli\u003eLaminated gusset structure: the inner rib structure bolts to the skid plates for full coating coverage and serviceability\u003c\/li\u003e\n\u003cli\u003eFinish: ships raw, or add Textured Black powder coat\u003c\/li\u003e\n\u003cli\u003eHand-built in the USA (Gilbert, AZ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2023 Toyota Tacoma, 2WD\/4WD, automatic transmission, 4.0L\/3.5L V6\u003c\/li\u003e\n\u003cli\u003eAccess Cab and Double Cab configurations only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstallation\u003c\/h4\u003e\n\u003cp\u003eThis is not a bolt-on kit. Exhaust rerouting and transmission crossmember modification (cutting and welding) are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Install Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle compatibility:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2005-2023 Toyota Tacoma, 2WD\/4WD, automatic transmission, 4.0L\/3.5L V6. Access Cab and Double Cab configurations only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFront skid plate compatibility:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDRT Crossmember Delete Skid Plate, DRT OE Engine Skid Plate, RCI engine skid plate. May fit others with modification. JD Fabrication LCA pivot kit fitment has not been confirmed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExhaust modification required.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe driver side crossover pipe must be rerouted around the transfer case, and the passenger side turn down section just before the factory Y-pipe must move a minimum of 5 inches toward the rear of the vehicle. Exhaust modifications are mandatory. Without them the skid system cannot be installed correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTransmission crossmember modification required.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe factory transmission crossmember is cut out and removed, and the included weld-on frame mounts are welded to the frame in its place. This is not a bolt-on installation. Cutting and welding are mandatory. If you are not comfortable performing these modifications, we recommend installation by a qualified fabrication or off-road shop.\u003c\/p\u003e","brand":"DRT Fabrication","offers":[{"title":"Steel \/ Raw Finish","offer_id":49036679053466,"sku":null,"price":1699.98,"currency_code":"CAD","in_stock":true},{"title":"Steel \/ Black Powder Coat","offer_id":49036679086234,"sku":null,"price":2124.97,"currency_code":"CAD","in_stock":true},{"title":"Aluminum Hybrid \/ Raw Finish","offer_id":49036679119002,"sku":null,"price":2039.98,"currency_code":"CAD","in_stock":true},{"title":"Aluminum Hybrid \/ Black Powder Coat","offer_id":49036679151770,"sku":null,"price":2464.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/DRT-Fabrication-Flat-Belly-Skid-Plate-Kit-for-2005-2023-Toyota-Tacoma-1.png?v=1787175376","url":"https:\/\/kraveautomotive.ca\/products\/drt-fabrication-flat-belly-skid-plate-kit-for-2005-2023-toyota-tacoma","provider":"KRAVE Automotive","version":"1.0","type":"link"}