{"title":"Rago Fabrication","description":"\u003cp\u003e\u003cspan\u003eRago Fabrication's products are the gold standard of fit, finish, and attention to detail. They're designed tough so you can trust they'll stand up to any job. When it comes to finding impeccable vehicle molle panels, racks or accessory mounts - nothing else compares with what Rago Fabrication has to offer.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"rago-fabrication-2025-toyota-4runner-full-width-winch-front-bumper","title":"Rago Fabrication 2025+ Toyota 4Runner Full-Width Winch Front Bumper","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Full-Width Winch Front Bumper\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis 6th Gen 4Runner Full-Width Winch Front Bumper delivers front-end protection while maintaining full compatibility with Toyota’s advanced safety technology. Designed with precision fitment and aggressive styling, this bumper enhances both capability and appearance without sacrificing OEM functionality.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA heavy duty concealed winch mount and integrated 1-inch thick D-ring clevis mounts that accept 3\/4-inch D-rings provide recovery options. The integrated center light mount accommodates a 30-inch dual row LED light bar to improve nighttime visibility on the trail. The high clearance sides open the wheel well to support oversized tires and maximize approach angles when navigating tough terrain. The bumper retains full functionality of Toyota Safety Sense, OEM parking sensors, and all factory drive assist features. An optional heavy-duty 3\/16-inch aluminum skid plate is available for additional underbody protection.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInstallation is straightforward with direct-fit mounting using supplied hardware, though trimming and riv-nut installation are required. Finished in a durable two-stage hammer black powder coat and proudly made in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated Center Light Mount To Accommodate (1) Universal 30\" LED Light Bar\u003c\/li\u003e\n\u003cli\u003eRetains TSS\u003c\/li\u003e\n\u003cli\u003eRetains OEM Parking Sensors\u003c\/li\u003e\n\u003cli\u003eCompatible All OEM Drive Assist Features\u003c\/li\u003e\n\u003cli\u003eIncludes A Heavy Duty Concealed Winch Mount\u003c\/li\u003e\n\u003cli\u003eMounts For (1) Universal 30\" LED Light Bar In Center\u003c\/li\u003e\n\u003cli\u003eIncludes (2) Integrated 1\" Thick CNC D-Ring Clevis Mounts For 3\/4\" D-Rings\u003c\/li\u003e\n\u003cli\u003eOptional Add-On Heavy Duty 3\/16\" Aluminum Skid Plate (AC7111203NA)\u003c\/li\u003e\n\u003cli\u003eAggressive Styling With OEM Like Fitment\u003c\/li\u003e\n\u003cli\u003eOpens Wheel Well For Running Oversized Tires\u003c\/li\u003e\n\u003cli\u003eHigh Clearance Sides For Extreme Approach Angle Access At Front Tires\u003c\/li\u003e\n\u003cli\u003eThis Installation Requires 2 People For Best Results\u003c\/li\u003e\n\u003cli\u003eRequires Trimming For Installation\u003c\/li\u003e\n\u003cli\u003eRiv Nut Installation Required\u003c\/li\u003e\n\u003cli\u003eDirect Fitment Using Supplied Hardware For Easy Installation\u003c\/li\u003e\n\u003cli\u003eDurable 2 Stage Hammer Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eProudly Made in the USA\u003c\/li\u003e\n\u003cli\u003eExpandable with Rago Brush Guard (Future Release)\u003c\/li\u003e\n\u003cli\u003eTRD Pro\/Trailhunter Version Coming Soon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_F7105031601NA.pdf?v=515645248171977181\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47720080703642,"sku":"F7105031601NA","price":2974.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Full-Width-Winch-Front-Bumper-4.png?v=1775670619"},{"product_id":"rago-fabrication-2025-toyota-4runner-under-hood-air-compressor-mount","title":"Rago Fabrication 2025+ Toyota 4Runner Under-Hood Air Compressor Mount","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Under-Hood Air Compressor Mount\u003c\/h3\u003e\n\u003cp\u003eThis compressor mount provides a dedicated under-hood location for the ARB Twin Air Compressor, both brushed and brushless versions, on the 2025+ Toyota 4Runner. Its low-profile design fits the engine bay layout while maintaining proper clearance around surrounding components. The bracket includes integrated provisions to relocate the factory computers, keeping all electronics secure.\u003c\/p\u003e\n\u003cp\u003eThe system is fully expandable and compatible with the Rago Wifey Air System (R60FTWIFEYAIRSYSTEM), Universal Air Mounts (R0000WIFEYAIRMOUNT), and the 6th Gen 4Runner Wifey Block Mount (AC7110800NA), to complete a full, robust air system. Installation is bolt-in with no drilling required, using existing mounting points on the vehicle. Built in the USA, this mount provides a stable, modular platform for a clean and reliable onboard air configuration.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow Profile Air Compressor Mount For The ARB Twin Compressor, Brushed \u0026amp; Brushless models\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMounts an Air Compressor Conveniently Under the Hood\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExpandable With Rago Fabrication Wifey Air System (R60FTWIFEYAIRSYSTEM)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExpandable With Rago Fabrication Universal Air Mounts (R0000WIFEYAIRMOUNT)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExpandable With Rago Fabrication 6th Gen 4Runner Wifey Block Mount (AC7110800NA)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProudly Made In The USA\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrushed Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasy Bolt-In Installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated Mounting To Relocate Factory Computers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo Drilling Required\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC7110700NA.pdf?v=18234529362447716962\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47720700575898,"sku":"AC7110700NA","price":279.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Under-Hood-Air-Compressor-Mount-2.png?v=1775683150"},{"product_id":"rago-fabrication-2025-toyota-4runner-rear-molle-storage-panel-system-pair","title":"Rago Fabrication 2025+ Toyota 4Runner Rear Molle Storage Panel System | Pair","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Rear Molle Storage Panel System | Pair\u003c\/h3\u003e\n\u003cp\u003eThe 6th Gen 4Runner Rear Window Molle Panels are perfect for storing your overland gear and off-road accessories. The molle design allows you to mount tools, pouches, air hoses, knife sheaths, recovery gear, med-kits, fire extinguishers, and other supplies. The panels are compatible with bolts, straps, zip ties, Quick Fists, and other tactical solutions for securing your equipment\/accessories. You can pair the molle panels with our optional Molle Storage Shelf for maximizing your 4Runner’s rear cargo storage space. For help seeing your gear at night, you can mount a Baja Designs Dome Light to each panel.\u003c\/p\u003e\n\u003cp\u003eThese molle panels are made from heavy-duty steel, and are finished in a sleek dual-stage hammer black powder coat that complements your rig’s interior styling. The panels mount to 4 install points for a rigid design that won’t rattle even when on rough terrain. They follow the factory lines of your rear windows for a seamless look. With these molle panels, you can optimize your 4Runner’s interior storage capabilities for your next overland excursion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e The panels require drilling and riv-nuts for installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMolle Panel Design for Mounting Gear \u0026amp; Accessories\u003c\/li\u003e\n\u003cli\u003eCompatible with a Variety of Attachment Systems\u003c\/li\u003e\n\u003cli\u003eOptional Rear Storage Shelf\u003c\/li\u003e\n\u003cli\u003e4 Install Points for Added Rigidity\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eDurable Steel Construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC7102801NA.pdf?v=177696065177581460\" rel=\"noopener\" target=\"_blank\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47720733180058,"sku":"AC7102801NA","price":698.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Rear-Molle-Storage-Panel-System-Pair-7.png?v=1775684188"},{"product_id":"rago-fabrication-2025-toyota-4runner-ditch-light-brackets","title":"Rago Fabrication 2025+ Toyota 4Runner Ditch Light Brackets","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Ditch Light Brackets\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThese 6th Gen 4Runner Ditch Light Brackets can mount up to a 6-inch pod light each for improved off-road lighting. The brackets are adjustable, so you can angle them forwards or towards the sides depending on your lighting needs. They feature a low-profile fitment that sits outside of you and your passengers' sightlines, so they don’t obstruct visibility. These mounts are made from heavy-duty steel, and are finished in a resilient dual-stage hammer black powder coat that complements the exterior styling of your 4Runner. The brackets provide integrated wire management and a fully bolt-on design for a straightforward \u0026amp; clean install process. Whether you need to identify obstacles ahead or hazards lurking on the sides of the trail, ditch light mounts are the perfect upgrade to your rig’s lighting capabilities.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounts up to 6” Pod Lights\u003c\/li\u003e\n\u003cli\u003eAdjustable Mounting Angle\u003c\/li\u003e\n\u003cli\u003eLow-Profile Positioning\u003c\/li\u003e\n\u003cli\u003eIntegrated Wire Management\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eDurable Steel Construction\u003c\/li\u003e\n\u003cli\u003eFully Bolt-On Installation\u003c\/li\u003e\n\u003cli\u003eSold as a Pair\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC7107701NA.pdf?v=1268771798431797159\" rel=\"noopener\" target=\"_blank\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47727584641178,"sku":"AC7107701NA","price":157.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Ditch-Light-Brackets-3.png?v=1775765880"},{"product_id":"rago-fabrication-2025-toyota-4runner-center-mount-winch-front-bumper","title":"Rago Fabrication 2025+ Toyota 4Runner Center Mount Winch Front Bumper","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Center Mount Winch Front Bumper\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe 6th Gen 4Runner Center Mount Front Bumper features a low-profile fitment for clearing rocks, shrubs, and other trail hazards during your overlanding adventures. The tapered design offers a sleek look that complements your 4Runner’s exterior styling. The bumper provides a hidden heavy-duty winch mount with accent cutouts on each side for accessing the winch. It also offers a pair of D-ring mounts for full vehicle recovery options. The integrated 20-inch light bar mount provides enhanced off-road lighting capabilities when in dark, dim, or foggy conditions.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis winch front bumper is crafted from durable steel, and is finished in a resilient dual-stage hammer black powder coat. This bumper is compatible with Toyota Safety Sense, and it retains the factory front camera, parking sensors, drive assist features, and fog lights. The bumper can be paired with Rago's\u003cspan\u003e \u003c\/span\u003eFront Skid Plate\u003cspan\u003e \u003c\/span\u003efor protecting your 4Runner’s front undercarriage from obstacles encountered on and off the trail. With the center mount bumper, you can be prepared for the obstacles that lie ahead.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003cspan\u003e Cutting is required for installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe bumper is compatible with the TRD Pro and Trailhunter skid plates with minor trimming on the front edge of the OEM skid plate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow-Profile Design\u003c\/li\u003e\n\u003cli\u003eHidden Heavy-Duty Winch Mount\u003c\/li\u003e\n\u003cli\u003e(1) 20” Dual Row Light Bar Mount\u003c\/li\u003e\n\u003cli\u003ePair of 1” Thick D-Ring Mounts\u003c\/li\u003e\n\u003cli\u003eTSS Compatible\u003c\/li\u003e\n\u003cli\u003eRetains OEM Front Camera, Parking Sensors, \u0026amp; Drive Assist Features\u003c\/li\u003e\n\u003cli\u003eRetains OEM Fog Lights\u003c\/li\u003e\n\u003cli\u003eOptional 3\/16” Aluminum Front Skid Plate\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eSteel Construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_F7103630701NA.pdf?v=13376117150405350845\" rel=\"noopener\" target=\"_blank\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47727757000858,"sku":"F7103630701NA","price":2098.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Center-Mount-Winch-Front-Bumper-5.png?v=1776103016"},{"product_id":"rago-fabrication-2025-toyota-4runner-crossmembers-for-factory-roof-rails","title":"Rago Fabrication 2025+ Toyota 4Runner Crossmembers For Factory Roof Rails","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Crossmembers For Factory Roof Rails\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 6th Gen 4Runner Crossmembers mount to the factory roof rails for creating a sturdy overland platform for a RTT or other gear, without the need for a full roof rack. The five crossmembers provide universal mounting holes, L-Track receiver mounts, and attachment points that are compatible with Rotopax mounts for a wide range of rooftop storage solutions. They feature a low-profile fitment that retains the sleek exterior styling of your 4Runner when not in use. The crossmembers are made from heavy-duty steel for easily withstanding the weight of rooftop tents, cargo boxes, and other heavy equipment and gear. They are finished in a resilient dual-stage hammer black powder coat that complements your rig’s exterior look. For those looking to prep their 4Runner’s roof for overland storage capabilities, these crossmembers provide versatile mounting solutions while retaining the sleek styling of your rig.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe crossmembers require the Factory Roof Rails for installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb id=\"docs-internal-guid-91b3cda3-7fff-15ef-935e-a7082392a443\"\u003e\u003cspan\u003ePlease Note:\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThe crossmembers require drilling and the use of riv-nuts for installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow-Profile Fitment\u003c\/li\u003e\n\u003cli\u003eSet of 5 Crossmembers\u003c\/li\u003e\n\u003cli\u003eMounts to OEM Roof Rails\u003c\/li\u003e\n\u003cli\u003eUniversal Mounting Pattern\u003c\/li\u003e\n\u003cli\u003eIntegrated L-Track Receiver Mounts\u003c\/li\u003e\n\u003cli\u003eIntegrated Mounting Points for Rotopax Mounts\u003c\/li\u003e\n\u003cli\u003eCompatible w\/ Rago’s E-MSPs for OEM Roof Rails\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eDurable Steel Construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC7109501NA.pdf?v=10430967851971065907\" rel=\"noopener\" target=\"_blank\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47742890049690,"sku":"AC7109501NA","price":1048.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Crossmembers-For-Factory-Roof-Rails-3.png?v=1776183900"},{"product_id":"rago-fabrication-2025-toyota-4runner-rear-hatch-ladder","title":"Rago Fabrication 2025+ Toyota 4Runner Rear Hatch Ladder","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Rear Hatch Ladder\u003c\/h3\u003e\n\u003cp\u003eThe 6th Gen 4Runner Rear Hatch Ladder delivers reliable, direct roof access for the 6th Gen platform while maintaining a tight, vehicle-specific fit. Built with double-wall aluminum side rails and reinforced steel mounting points, the ladder stays rigid under load and resists long-term flex or fatigue. Each step is formed from high-quality extruded aluminum and finished with rubber traction pads for secure footing in wet, dusty, or uneven conditions.\u003c\/p\u003e\n\u003cp\u003eAccessory mounting points run the full length of both side rails, giving you additional tie-down or gear-mounting locations that integrate cleanly with Rago Fabrication roof racks. The ladder features a durable hammer-black powder-coat finish with brushed aluminum accents to complement the 4Runner’s styling. Installation requires drilling for a permanent, secure mount.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect Solution To Add Convenient Roof Top Access To Your 6th Gen 4Runner\u003c\/li\u003e\n\u003cli\u003ePairs Perfectly With Rago Fabrication Roof Racks\u003c\/li\u003e\n\u003cli\u003eIdeal for an Overland Setup\u003c\/li\u003e\n\u003cli\u003eDouble Wall Aluminum Side Rails With Durable Steel Mounting\u003c\/li\u003e\n\u003cli\u003eHigh Quality Extruded Aluminum Steps With Rubber Traction Pads\u003c\/li\u003e\n\u003cli\u003eIncorporated Accessory Mounting Points Running The Full Length Of Each Side\u003c\/li\u003e\n\u003cli\u003eDurable Hammer Black Powdercoat Finish With Brushed Aluminum Accents\u003c\/li\u003e\n\u003cli\u003eDrilling Required for Installation\u003c\/li\u003e\n\u003cli\u003eProudly Made In The USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC7110201NA.pdf?v=5965269870020063398\" rel=\"noopener\" target=\"_blank\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47743014142106,"sku":"AC7110201NA","price":997.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Rear-Hatch-Ladder-7.png?v=1776187496"},{"product_id":"rago-fabrication-2025-toyota-4runner-center-console-molle-panels","title":"Rago Fabrication 2025+ Toyota 4Runner Center Console Molle Panels","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Center Console Molle Panels\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 6th Gen 4Runner Center Console Molle Panels are perfect for securing knives, multi-tools, pouches, radios, holsters, and other daily gear within an arm’s reach. You can use straps, bolts, zip-ties, and other molle compatible attachment systems for securing tools \u0026amp; accessories to the panels. They are designed to closely follow the factory lines of your 4Runner for a streamlined look.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe molle panels feature PEM nuts for 10-24 size bolts to secure device mounts for quick access to your phone, tablet, GPS, or other electronic devices. The panels are compatible with Ram Diamond Base Mounts, Bulletpoint Mounting Solutions, \u0026amp; the Quad Lock Systems\/Base Plates. They retain full access to the factory handles, controls, charging station, and cup holders. These molle panels are made from durable steel, and are finished in a dual-stage hammer black powder coat for a sleek styling.\u003cstrong\u003e \u003c\/strong\u003eAccessory mounting holes are spaced 1.9-inches\/48.5mm apart (AMPS Standard). With these center console molle panels, you can optimize your 4Runner’s interior storage capabilities and secure both you \u0026amp; your passenger’s vital gear close at hand.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-contrast=\"auto\"\u003eSome drilling is required for installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan data-contrast=\"auto\"\u003ePlease Note:\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-contrast=\"auto\"\u003e10-24 bolts for electronic accessory mounts are not included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver \u0026amp; Passenger Side Center Console Molle Panels\u003c\/li\u003e\n\u003cli\u003eVersatile Mounting Capabilities\u003c\/li\u003e\n\u003cli\u003eCompatible w\/ Molle Attachment Systems\u003c\/li\u003e\n\u003cli\u003ePEM Nuts Located On Top of Both Panels for 10-24 Accessory Bolts\u003c\/li\u003e\n\u003cli\u003eCompatible with Most Digital Device Mounts\u003c\/li\u003e\n\u003cli\u003eRetains Access to OEM Center Console Features\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eDurable Steel Construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC6702201NA.pdf?v=2125024851934126079\" rel=\"noopener\" target=\"_blank\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47743201181850,"sku":"AC6702201NA","price":349.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Center-Console-Molle-Panels-7.png?v=1776197417"},{"product_id":"rago-fabrication-2025-toyota-4runner-device-dash-mount","title":"Rago Fabrication 2025+ Toyota 4Runner Device Dash Mount","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Device Dash Mount\u003c\/h3\u003e\n\u003cp\u003eThe 6th Gen 4Runner Digital Device Dash Mount gives you a solid, OEM-like platform for securing phones, tablets, GPS units, and trail electronics directly above and beside the factory 8-inch multimedia display. Its low-profile design integrates cleanly into the dash, adding multiple threaded 10-24 mounting points while keeping full access to the factory radio USB port. An integrated dual-USB 12V charging port brings dependable power right where you need it.\u003c\/p\u003e\n\u003cp\u003eThis mount is fully RAM Mounts compatible, built from durable materials, and finished in a tough Hammer Black powder coat to handle daily use and off-road vibration. Installation requires drilling for a secure, permanent fit. Designed and manufactured in the USA, it delivers a precise fitment and a stable mounting base for any device setup you run.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnly Compatible With The Factory 8-in. Audio Multimedia Display\u003c\/li\u003e\n\u003cli\u003ePerfect Solution To Add Device Mounts To Your Dash\u003c\/li\u003e\n\u003cli\u003eLow-Profile Precise OEM Like Fitment\u003c\/li\u003e\n\u003cli\u003eIntegrated 12v Dual USB Charging Port\u003c\/li\u003e\n\u003cli\u003eRetains Access To The Factory Radio USB Port\u003c\/li\u003e\n\u003cli\u003eIncludes Multiple Threaded Mounting Points For 10-24 Hardware\u003c\/li\u003e\n\u003cli\u003eRAM Mount Compatible\u003c\/li\u003e\n\u003cli\u003eDurable Hammer Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eDrilling Required for Installation\u003c\/li\u003e\n\u003cli\u003eProudly Made In The USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC7110901NA.pdf?v=11841315851215435455\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47743264325786,"sku":"AC7110901NA","price":314.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Device-Dash-Mount-2.png?v=1776198634"},{"product_id":"rago-fabrication-2025-toyota-4runner-molle-panel-storage-shelf","title":"Rago Fabrication 2025+ Toyota 4Runner Molle Panel Storage Shelf","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Molle Panel Storage Shelf\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 6th Gen 4Runner Molle Storage Shelf attaches to Rago Fabrication's \u003c\/span\u003e\u003cspan\u003eRear Molle Storage Panel System\u003c\/span\u003e\u003cspan\u003e for maximizing your rig’s cargo space. The shelf features a molle panel design for mounting pouches, med-kits, knife sheaths, tools, and more underneath. On top of the shelf, you can store sleeping bags, blankets, bags, straps, storage boxes, and other larger gear. It is compatible with straps, bolts, \u003c\/span\u003e\u003cspan\u003eQuick Fists\u003c\/span\u003e\u003cspan\u003e, zip ties, and other molle compatible attachment systems for securing a wide range of gear above or below the shelf.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe molle shelf features raised edges on the front and back for preventing your supplies from sliding off while driving. You can adjust the mounting height of the shelf to leave more room above or below the shelf depending on your storage needs. The shelf is made from heavy-duty steel for withstanding the weight from your gear, and it is finished in a dual-stage hammer black powder coat for a sleek look that complements your rig’s interior. With our shelf and rear window molle panels, you can confidently stow your overland gear, off-road supplies, and daily accessories out of the way.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003cspan\u003e Rago's\u003c\/span\u003e Rear Molle Storage Panel System is required for installation of the Rear Storage Shelf.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStorage Options Above \u0026amp; Below the Shelf\u003c\/li\u003e\n\u003cli\u003eAdjustable Mounting Height\u003c\/li\u003e\n\u003cli\u003eCompatible with Molle Accessories \u0026amp; Attachment Systems\u003c\/li\u003e\n\u003cli\u003eMounts to Rago’s Rear Window Molle Panels\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eDurable Steel Construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC7103001NA.pdf?v=5487174335624151859\" rel=\"noopener\" target=\"_blank\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47743299027098,"sku":"AC7103001NA","price":698.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Molle-Panel-Storage-Shelf-8.png?v=1776199605"},{"product_id":"rago-fabrication-2025-toyota-4runner-center-mount-rear-bumper","title":"Rago Fabrication 2025+ Toyota 4Runner Center Mount Rear Bumper","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Center Mount Rear Bumper\u003c\/h3\u003e\n\u003cp\u003eThe 6th Gen 4Runner Center Mount Rear Bumper provides enhanced off-road utility for your next overland adventure. The bumper’s low-profile design helps you avoid larger obstacles encountered on the trail. For improved rear visibility, our bumper features two pod light mounts that can run Baja Designs S2 or RIGID SR-M lights. It is finished in a resilient dual-stage hammer black powder coated finish for a sleek look that accents your 4Runner’s factory design. The bumper retains the factory blind spot monitoring and parking sensors. For maximum protection from rocks, shrubs, and other off-road hazards, you can pair this rear bumper with Rago's Center Mount Front Bumper. With our rear bumper, you will not only enhance your 4Runner’s durability, but also level-up its exterior styling.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e* Please Note:\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eTrimming is required for installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow-Profile Fitment\u003c\/li\u003e\n\u003cli\u003e(2) Mounts for S2 or SR-M Pod Lights\u003c\/li\u003e\n\u003cli\u003eRetains OEM Blind Spot Monitoring\u003c\/li\u003e\n\u003cli\u003eRetains OEM Parking Sensors\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eDurable Steel Construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_R710255090103.pdf?v=17232506933282347666\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47783718125722,"sku":"R710255090103","price":1748.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Center-Mount-Rear-Bumper-2.png?v=1776284375"},{"product_id":"rago-fabrication-2025-toyota-4runner-exterior-molle-storage-panels-for-factory-roof-rails","title":"Rago Fabrication 2025+ Toyota 4Runner Exterior Molle Storage Panels For Factory Roof Rails","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Exterior Molle Storage Panels For Factory Roof Rails\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 6th Gen 4Runner External Rear Window Molle Panels mount to the factory roof rails or Rago's \u003c\/span\u003e\u003cspan\u003eCrossmembers\u003c\/span\u003e\u003cspan\u003e to provide enhanced storage options for your overland gear and supplies. The molle pattern design is perfect for mounting equipment via bolts, straps, zip ties, \u003c\/span\u003e\u003cspan\u003eQuick Fists\u003c\/span\u003e\u003cspan\u003e, and other molle-compatible attachment systems. The integrated mounting points for Rotopax mounts offer the perfect spot to secure fuel or water containers, so you are properly stocked-up in case of emergency situations. The molle panels feature slots for carriage bolt mounting, so you have quick access to shovels, axes, and other necessary tools.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe E-MSPs are made from durable steel, and are finished in a sleek dual-stage hammer black powder coat that complements your 4Runner’s exterior styling. The tops of these panels install to the factory roof rails or Rago’s Crossmembers, and the bottoms secure to the rear windows with the included heavy-duty RAM Mount Suction Cups. Whether you’re optimizing your 4Runner for your next overland adventure or you want additional storage space for those weekends spent on the trail, our E-MSPs provide the mounting capabilities you’ve been looking for.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe E-MSPs require drilling and riv-nuts for installation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease Note:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThese panels will not fit the ARB Roof Racks that some models come optioned with.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMolle Panel Design\u003c\/li\u003e\n\u003cli\u003eCompatible with Molle Accessories \u0026amp; Attachment Systems\u003c\/li\u003e\n\u003cli\u003eIntegrated Mounting Points for Rotopax Mounts\u003c\/li\u003e\n\u003cli\u003eFeatured Slots for Carriage Bolt Mounting\u003c\/li\u003e\n\u003cli\u003eCompatible w\/ Factory Roof Rails \u0026amp; Rago Crossmembers\u003c\/li\u003e\n\u003cli\u003e(2) RAM Mount Suction Cups Included per Panel\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eDurable Steel Construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC7109201NA.pdf?v=184891010202238339\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Pair","offer_id":47811082387610,"sku":"AC7109201NA","price":962.47,"currency_code":"CAD","in_stock":true},{"title":"Driver Side","offer_id":47811082420378,"sku":"AC7109301NA","price":489.97,"currency_code":"CAD","in_stock":true},{"title":"Passenger Side","offer_id":47811082453146,"sku":"AC7109401NA","price":489.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Exterior-Molle-Storage-Panels-For-Factory-Roof-Rails-6.png?v=1776367457"},{"product_id":"rago-fabrication-2025-toyota-4runner-trailing-arm-skid-plates","title":"Rago Fabrication 2025+ Toyota 4Runner Trailing Arm Skid Plates","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Trailing Arm Skid Plates\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe 6th Gen 4Runner Frame Mounted Trailing Arm Skid Plates shield your trailing arms from off-road hazards. Their drafted leading face helps your rig deflect and glide over hard obstacles to prevent the trailing arms from fully absorbing direct impacts. The skids are made from heavy-duty steel to prevent costly damage, and they mount directly to your 4Runner’s frame for a sturdy design. They are finished in a resilient dual-stage hammer black powder coat. With these trailing arm skid plates, you can prevent misalignment and harm to your suspension during your next overland adventure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrame Mount Design\u003c\/li\u003e\n\u003cli\u003eDrafted Leading Face for Deflecting Impacts\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Steel Construction\u003c\/li\u003e\n\u003cli\u003eSold as a Pair\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC7106801NA.pdf?v=2774939559607780921\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47811685974170,"sku":"AC7106801NA","price":489.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Trailing-Arm-Skid-Plates-6.png?v=1776368889"},{"product_id":"rago-fabrication-2025-toyota-4runner-rear-shock-guards","title":"Rago Fabrication 2025+ Toyota 4Runner Rear Shock Guards","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Rear Shock Guards\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe 6th Gen 4Runner Rear Shock Guards protect your shocks from rocks, roots, and other hazards encountered on the trail. The shocks’ drafted leading face helps your rig glide over obstacles and deflect harsh impacts, preventing your shocks from absorbing the full force. These shock guards feature double sheared mounts for maximum strength. The guards are made from heavy-duty steel, and are finished in a resilient dual-stage hammer black powder coat. With these rear shock guards, you can shield the first point of contact on your 4Runner’s undercarriage, helping you avoid costly damage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrafted Leading Face for Deflecting Impacts\u003c\/li\u003e\n\u003cli\u003eDouble Sheared Mounts for Max Strength\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Steel Construction\u003c\/li\u003e\n\u003cli\u003eSold as a Pair\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC7102001NA.pdf?v=12898294391906376341\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47811693314202,"sku":"AC7102001NA","price":437.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Rear-Shock-Guards-3.png?v=1776369272"},{"product_id":"rago-fabrication-quick-fist-mounts-clamps-for-molle-panels-truck-beds-pair","title":"Rago Fabrication Quick Fist Mounts \u0026 Clamps for Molle Panels \u0026 Truck Beds | Pair","description":"\u003ch3\u003eRago Fabrication Quick Fist Mounts \u0026amp; Clamps for Molle Panels \u0026amp; Truck Beds | Pair\u003c\/h3\u003e\n\u003cp\u003eIf you're an outdoors kind of person, you know that being able to access your gear quickly and easily is crucial. Rago Fabrication has created the perfect solution with their Quick Fist Mounts. These mounts can be attached to any flat surface on your vehicle: Molle Panels, Truck Bed, Bed Rack, Roof Rack, Cargo Rails, and more (Some drilling may be required.)  They're also designed to work seamlessly with all of Rago's molle panels, and we also confirmed fitment on ADD Offroad \u0026amp; DV8 Offroad molle panels as well. With these mounts you can customize the placement of your gear to suit your needs. The mounts are made from CNC-cut aluminum, so they're extremely durable and won't rust, even in harsh climates. Plus, the included pair of Quick Fist Clamps make it easy to securely attach tools like shovels, picks, and axes to your rig.\u003c\/p\u003e\n\u003cp\u003eEach clamp supports approximately 25 lbs and can hold objects 1-inch to 2.25-inches in diameter. Clamps will not be affected by heat or cold. Whether you're hitting the trails for a day trip or embarking on a long-term overland adventure, Rago's Quick Fist Mounts are a must-have item for any off-road build.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes a Pair of Quick Fist Clamps and Mounts\u003c\/li\u003e\n\u003cli\u003eCNC Cut Aluminum\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Included\u003c\/li\u003e\n\u003cli\u003eCan Mount to any Flat Surface Utilizing 1\/4\" Bolts (Drilling May be Required)\u003c\/li\u003e\n\u003cli\u003eMounts to any Rago Molle Panel, ADD Offroad Molle Panel, \u0026amp; DV8 Offroad Molle Panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/R0000MSPQUICK_Rago_InstallGuide.pdf?v=2343915765904135872\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47812183195802,"sku":"R0000MSPQUICK","price":87.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-Quick-Fist-Mounts-Clamps-for-Molle-Panels-Truck-Beds-Pair-6.png?v=1776376394"},{"product_id":"rago-fabrication-2025-toyota-4runner-wifey-block-mount","title":"Rago Fabrication 2025+ Toyota 4Runner Wifey Block Mount","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Wifey Block Mount\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe Wifey Block Mount was designed to install directly to the Rago Air Compressor Mount to enable you to connect the Wifey Air System Manifold in a convenient location next to the compressor. Installation is a simple bolt-on process. \u003cstrong\u003ePlease note that this is a component of a larger system.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eREQUIRES The\u003cspan\u003e \u003c\/span\u003eRago Fabrication 2025-Up Toyota 4Runner Air Compressor Mount (AC7110700NA)\u003c\/li\u003e\n\u003cli\u003ePerfect Solution To Mount The Wifey Air System Manifold\u003c\/li\u003e\n\u003cli\u003eExpandable With\u003cspan\u003e \u003c\/span\u003eRago Fabrication Wifey Air System (R60FTWIFEYAIRSYSTEM)\u003c\/li\u003e\n\u003cli\u003eExpandable With\u003cspan\u003e \u003c\/span\u003eRago Fabrication Universal Air Mounts (R0000WIFEYAIRMOUNT)\u003c\/li\u003e\n\u003cli\u003eBrushed Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eMade In The USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC7110700NA.pdf?v=18234529362447716962\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47812272816282,"sku":"AC7110800NA","price":96.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Wifey-Block-Mount-3.png?v=1776377267"},{"product_id":"rago-fabrication-2025-toyota-4runner-skid-plate-for-full-width-winch-front-bumper","title":"Rago Fabrication 2025+ Toyota 4Runner Skid Plate for Full-Width Winch Front Bumper","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Skid Plate for Full-Width Winch Front Bumper\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eProtect critical front-end components on your 6th Gen 4Runner with the Rago Fabrication Front Bumper Skid Plate. Designed as a direct add-on for the Rago Full-Width Winch Front Bumper (F7105031601NA), this skid plate reinforces your truck’s front end when navigating rocks, ruts, and unexpected trail obstacles.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConstructed from heavy-duty 3\/16” aluminum, it delivers an ideal balance of strength and weight savings while helping deflect impacts on the trail. The durable satin black powder coat enhances corrosion resistance and maintains a clean, factory-quality appearance that complements your bumper setup.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47812312400026,"sku":"AC7111203NA","price":752.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Skid-Plate-for-Full-Width-Winch-Front-Bumper-7.png?v=1776441090"},{"product_id":"rago-fabrication-2025-toyota-4runner-skid-plate-for-center-mount-front-bumper","title":"Rago Fabrication 2025+ Toyota 4Runner Skid Plate for Center Mount Front Bumper","description":"\u003ch3\u003eRago Fabrication 2025+ Toyota 4Runner Skid Plate for Center Mount Front Bumper\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 6th Gen 4Runner Front Skid Plate pairs with Rago's \u003c\/span\u003e\u003cspan\u003eCenter Mount Winch Front Bumper\u003c\/span\u003e\u003cspan\u003e to protect the front of your rig’s undercarriage from rocks, shrubs, debris, and other hazards encountered when on the trail. The skid is made from durable and lightweight aluminum, and is finished in a resilient satin black powder coat that complements our bumper’s and your 4Runner’s sleek styling. For a quick and easy install process, the skid is fully bolt-on. With our skid plate, you can prevent expensive damage during overland trips.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb id=\"docs-internal-guid-32e1c6f3-7fff-9291-89a7-feb3ff5c795c\"\u003e\u003cspan\u003ePlease Note:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003eThe skid plate uses riv-nuts for installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Rago’s\u003cspan\u003e \u003c\/span\u003eCenter Mount Winch Front Bumper\u003c\/li\u003e\n\u003cli\u003eSatin Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003e3\/16“ Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eFully Bolt-On Installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC7106903NA.pdf?v=14556458424537925416\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47815432896666,"sku":"AC7106903NA","price":664.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2025-Toyota-4Runner-Skid-Plate-for-Center-Mount-Front-Bumper-5.png?v=1776446717"},{"product_id":"rago-fabrication-universal-molle-panel-rotopax-mounts","title":"Rago Fabrication Universal Molle Panel RotopaX Mounts","description":"\u003ch3\u003eRago Fabrication Universal Molle Panel RotopaX Mounts\u003c\/h3\u003e\n\u003cp\u003eThis Universal Molle Panel Tank Mount enables you to mount RotopaX (and other brands) reservoir tanks to Rago Fabrication molle panels. Rago has also confirmed perfect fitment on ADD Offroad molle panels as well as DV8 Offroad molle panels. The mounting plate is designed specifically for use with the RotopaX Tank Mount\/T-Handle (Sold Separately), and can accommodate any size RotopaX tank.\u003c\/p\u003e\n\u003cp\u003eThese are ideal for bed side or bed cab molle panels, but can also be mounted to Rago's rear window molle panels. Their universal fitment is intended for any kind of custom setup that suits your needs, whether that is a vehicle, trailer, garage or other application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note\u003c\/strong\u003e:\u003cspan\u003e \u003c\/span\u003eRotopaX Tank Mount \/ T-Handle\u003cspan\u003e \u003c\/span\u003eis not included.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRotopaX \u0026amp; Other Brands Mount for Molle Panels\u003c\/li\u003e\n\u003cli\u003eCompatible with All RotopaX Tank Sizes (Mounting Space Permitted)\u003c\/li\u003e\n\u003cli\u003eCompatible with Rago and Other Brand Molle Panels\u003c\/li\u003e\n\u003cli\u003eUniversal Fitment for Trailers, Garages, etc.\u003c\/li\u003e\n\u003cli\u003eMounting Hardware is Included\u003c\/li\u003e\n\u003cli\u003eMay Require Different Hardware for Your Unique Application\u003c\/li\u003e\n\u003cli\u003eLow Profile Fitment\u003c\/li\u003e\n\u003cli\u003eDurable 2-Stage Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/AC9905301NA-Rago_InstallGuide.pdf?v=6541062766528979479\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47815502692506,"sku":"AC9905301NA","price":61.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-Universal-Molle-Panel-RotopaX-Mounts-5.png?v=1776448397"},{"product_id":"rago-fabrication-universal-toyota-bed-rail-accessory-mounting-bracket-pair","title":"Rago Fabrication Universal \u0026 Toyota Bed Rail Accessory Mounting Bracket | Pair","description":"\u003ch3\u003eRago Fabrication Universal \u0026amp; Toyota Bed Rail Accessory Mounting Bracket | Pair\u003c\/h3\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW251255155 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW251255155 BCX0\"\u003e\u003cspan class=\"TextRun SCXW251255155 BCX0\" lang=\"EN\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW251255155 BCX0\"\u003eThese Accessory Mounts were designed for versatile accessory mounting options. Depending on your application, you can run one or multiple mounts to accommodate accessories like chase lights, a light bar, awnings, hi lift jack, whip flags, antennas, and more.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW251255155 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW251255155 BCX0\"\u003e\u003cspan class=\"TextRun SCXW251255155 BCX0\" lang=\"EN\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW251255155 BCX0\"\u003eChoose from the Toyota Factory Bed Rail option or the Universal option.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW251255155 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW251255155 BCX0\"\u003e\u003cspan class=\"TextRun SCXW251255155 BCX0\" lang=\"EN\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW251255155 BCX0\"\u003e\u003cstrong\u003eTOYOTA BED RAIL:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"TextRun SCXW251255155 BCX0\" lang=\"EN\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW251255155 BCX0\"\u003eIncluded with the brackets are CNC aluminum t-nuts compatible with the factory bed rail. These can be used on both the side rails \u0026amp; the bed cab rail.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW251255155 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW251255155 BCX0\"\u003e\u003cstrong\u003e\u003cspan class=\"TextRun SCXW251255155 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW251255155 BCX0\"\u003eUNIVERSAL:\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"TextRun SCXW251255155 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW251255155 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003eIncluded with the brackets are\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun SpellingErrorV2Themed SCXW251255155 BCX0\"\u003eRiv\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW251255155 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003eNuts and other hardware that enables you to mount these brackets to any truck bed and most roof racks (confirmed on Rago Roof Racks). Please note that drilling may be\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW251255155 BCX0\"\u003erequired\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW251255155 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003efor this version, depending on use case.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW251255155 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW251255155 BCX0\"\u003e\u003cspan class=\"TextRun SCXW251255155 BCX0\" lang=\"EN\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW251255155 BCX0\"\u003eManufactured from\u003cspan\u003e \u003c\/span\u003e\u003cspan data-contrast=\"auto\" lang=\"EN-US\" class=\"TextRun SCXW28558532 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW28558532 BCX0\"\u003ehigh-quality\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003esteel and finished in a durable hammer black powder coat, these robust mounts can handle the roughest of trails while keeping your gear secure. These are made with pride in the USA.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW251255155 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW251255155 BCX0\"\u003e\u003cstrong\u003e\u003cspan class=\"TextRun SCXW251255155 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW251255155 BCX0\"\u003eFitment Note:\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"TextRun SCXW251255155 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW251255155 BCX0\"\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOEM Bed Rail is\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW251255155 BCX0\"\u003erequired\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW251255155 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003efor installation of Toyota Bed Rail version.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal Option\u003c\/li\u003e\n\u003cli\u003eToyota Bed Rail Option\u003c\/li\u003e\n\u003cli\u003eVersatile Adjustable Mounting Options for Numerous Accessories\u003c\/li\u003e\n\u003cli\u003ePerfect for Chase Lights, Light Bars, Awnings, Antennas, Whip Flags, \u0026amp; More\u003c\/li\u003e\n\u003cli\u003eCan be Used Individually or in Groups for Endless Mounting Options\u003c\/li\u003e\n\u003cli\u003eIncludes CNC Aluminum T-Nuts And Black Stainless Steel Mounting Hardware\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as a Pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC6705801NA.pdf?v=6304153253266357321\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Rago Fabrication","offers":[{"title":"Universal","offer_id":47815748223130,"sku":"AC9906301NA","price":174.91,"currency_code":"CAD","in_stock":true},{"title":"Toyota Bed Rail","offer_id":47815748255898,"sku":"AC6705801NA","price":174.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-Universal-Toyota-Bed-Rail-Accessory-Mounting-Bracket-Pair-2.png?v=1776456242"},{"product_id":"rago-fabrication-ditch-light-bracket-extensions-pair","title":"Rago Fabrication Ditch Light Bracket Extensions | Pair","description":"\u003ch3\u003eRago Fabrication Ditch Light Bracket Extensions | Pair\u003c\/h3\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW251255155 BCX0\"\u003e\n\u003cp\u003eRago Fabrication Ditch light Bracket Extensions allow you to have two lights instead of one. Easily attaches onto existing brackets. The\u003cspan\u003e extensions do not interfere with the opening of your hood. High precision laser aligning and cutting is used to ensure that our Ditch light Bracket Extensions stay in place on rugged trails.\u003c\/span\u003e These\u003cspan\u003e ditch bracket extensions are suitable for most SUVs \u0026amp; trucks. This extension is compatible with Rago's Ditch light brackets \u0026amp; with most ditch light brackets on the market.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e: adding additional lights to ditch brackets MAY cause vibration.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSimple Install\u003c\/li\u003e\n\u003cli\u003eNo Hardware Needed\u003c\/li\u003e\n\u003cli\u003eWorks with Different Manufacturers Ditch Brackets\u003c\/li\u003e\n\u003cli\u003eBlack Textured Powder Coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47815763558554,"sku":"RACCDITEXT","price":48.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-Ditch-Light-Bracket-Extensions-Pair-5.png?v=1776456729"},{"product_id":"rago-fabrication-ham-antenna-ditch-bracket-extension","title":"Rago Fabrication Ham Antenna Ditch Bracket Extension","description":"\u003ch3\u003eRago Fabrication Ham Antenna Ditch Bracket Extension\u003c\/h3\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW251255155 BCX0\"\u003e\n\u003cp\u003eRago Fabrication Ditch light Bracket Extensions are all you need to add a Ham Radio Antenna to your ditch brackets. It easily attaches to existing brackets. They are CAD designed, CNC cut and powder coated black for durability. These are compatible with any brand of ditch light brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe mounting slot allows you to adjust how far out from the bracket you want to place your antenna.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This was NOT intended for CB antennas, only Ham antennas\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eHole Dimension: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eQuick \u0026amp; Easy Install\u003c\/li\u003e\n\u003cli\u003eNo Hardware Needed\u003c\/li\u003e\n\u003cli\u003eWorks with Different Manufacturers Ditch Brackets\u003c\/li\u003e\n\u003cli\u003eDoes not interfere with opening and closing your hood\u003c\/li\u003e\n\u003cli\u003ePowder Coated Textured Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47815769358490,"sku":"R0000ACCHAMEXT","price":39.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-Ham-Antenna-Ditch-Bracket-Extension-5.png?v=1776456970"},{"product_id":"rago-fabrication-2014-2024-toyota-4runner-center-mount-winch-front-bumper-with-top-hoop","title":"Rago Fabrication 2014-2024 Toyota 4Runner Center Mount Winch Front Bumper with Top Hoop","description":"\u003ch3\u003eRago Fabrication 2014-2024 Toyota 4Runner Center Mount Winch Front Bumper with Top Hoop\u003c\/h3\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW42771435 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW42771435 BCX0\"\u003e\u003cspan data-contrast=\"auto\" lang=\"EN-US\" class=\"TextRun SCXW42771435 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003eThe 5th Gen 4Runner Winch Front Bumper comes equipped with a steel bull bar that shields the front of your rig from larger obstacles\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003eencountered\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003eon and off the road. The bumper features a low-profile design that helps you clear rocks and shrubs on the trail. The central single row LED 30-inch light bar mount, pair of cube or Rigid SRM\/Baja Designs S2 Series light mounts, and four six-inch round light mounts at the top of the bumper offer a variety of off-road lighting options. The front bumper features a hi\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003edden heavy-duty winch\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun ContextualSpellingAndGrammarErrorV2Themed SCXW42771435 BCX0\"\u003emount\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003eand two CNC cut D-ring mounts for vehicle recovery capabilities.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW42771435 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW42771435 BCX0\"\u003e\u003cspan data-contrast=\"auto\" lang=\"EN-US\" class=\"TextRun SCXW42771435 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003eThe bumper and bull bar are made from\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"TextRun SCXW28558532 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW28558532 BCX0\"\u003ehigh-quality\u003c\/span\u003e\u003c\/span\u003e steel, and they are finished in a\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun ContextualSpellingAndGrammarErrorV2Themed SCXW42771435 BCX0\"\u003edual-stage\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003ehammer black powder coat that accents your 4Runner’s sleek exterior styling. It\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003eretains\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003ethe OEM fog lights and Toyota Safety Sense. Rago's optional aluminum\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\" lang=\"EN-US\" class=\"TextRun Underlined SCXW42771435 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003eFront Skid Plate\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-contrast=\"auto\" lang=\"EN-US\" class=\"TextRun SCXW42771435 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003eguards your undercarriage from debris, shrubs, rocks, and other obstacles that can cause costly damages.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW42771435 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW42771435 BCX0\"\u003e\u003cstrong\u003e\u003cspan data-contrast=\"auto\" lang=\"EN\" class=\"TextRun SCXW42771435 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003eThis bumper is not compatible with the Limited trim level or TRD Pro front skid plate.\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"EOP SCXW42771435 BCX0\" data-ccp-props='{\"201341983\":0,\"335559740\":276}'\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW42771435 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW42771435 BCX0\"\u003e\u003cstrong\u003e\u003cspan data-contrast=\"auto\" lang=\"EN-US\" class=\"TextRun SCXW42771435 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003ePlease Note\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-contrast=\"auto\" lang=\"EN-US\" class=\"TextRun SCXW42771435 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003e\u003cstrong\u003e:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-contrast=\"auto\" lang=\"EN-US\" class=\"TextRun SCXW42771435 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003eThe TSS is not\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003eretained\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003eif the bumper’s top round light mounts are\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003eutilized\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSteel Bull Bar\u003c\/li\u003e\n\u003cli\u003eLow-Profile Fitment\u003c\/li\u003e\n\u003cli\u003e(1) 30” Single Row LED Light Bar Mount\u003c\/li\u003e\n\u003cli\u003ePair of Cube or Rigid SRM\/Baja Designs S2 Series Light Mounts\u003c\/li\u003e\n\u003cli\u003e(4) 6” Round Light Mounts\u003c\/li\u003e\n\u003cli\u003eHidden Standard Heavy-Duty Winch Mount\u003c\/li\u003e\n\u003cli\u003ePair of 1” Thick D-ring Mounts\u003c\/li\u003e\n\u003cli\u003eRetains OEM Fog Lights\u003c\/li\u003e\n\u003cli\u003eTSS Compatible\u003c\/li\u003e\n\u003cli\u003eOptional 3\/16” Aluminum Front Skid Plate\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eDurable Steel Construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_F6603630801NA.pdf?v=17817281366333683539\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47815880147098,"sku":"F6604030801NA","price":2274.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2014-2024-Toyota-4Runner-Center-Mount-Winch-Front-Bumper-with-Top-Hoop-2.png?v=1776459360"},{"product_id":"rago-fabrication-2014-2024-toyota-4runner-center-mount-winch-front-bumper","title":"Rago Fabrication 2014-2024 Toyota 4Runner Center Mount Winch Front Bumper","description":"\u003ch3\u003eRago Fabrication 2014-2024 Toyota 4Runner Center Mount Winch Front Bumper\u003c\/h3\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW42771435 BCX0\"\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW17833145 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW17833145 BCX0\"\u003e\u003cspan class=\"TextRun SCXW17833145 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003eThe 5th Gen 4Runner Center Mount Winch Front Bumper provides unmatched style and utility while\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003eremaining\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003elow-profile. When on the trail, this bumper will protect the front of your 4Runner from rocks, shrubs, debris, and other obstacles. For low-visibility conditions, Rago's front bumper features multiple lighting options. You can run a central 30-inch single row LED light bar, a pair of\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun ContextualSpellingAndGrammarErrorV2Themed SCXW17833145 BCX0\"\u003ecube\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003eor Rigid SRM\/Baja Designs S2 Series lights, and up to four 6-inch round lights on top.\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559740\":276}' class=\"EOP SCXW17833145 BCX0\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW17833145 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW17833145 BCX0\"\u003e\u003cspan class=\"TextRun SCXW17833145 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003eRecovery options are provided by a hidden heavy-duty winch mount and two\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun ContextualSpellingAndGrammarErrorV2Themed SCXW17833145 BCX0\"\u003e1-inch thick\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003eD-ring mounts for ¾” D-rings.\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"TextRun SCXW17833145 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003e*\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"TextRun SCXW17833145 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003eToyota Safety Sense and factory fog lights are\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003eretained\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003ewith the bumper design. Made from 1\/\u003c\/span\u003e\u003cspan class=\"NormalTextRun ContextualSpellingAndGrammarErrorV2Themed SCXW17833145 BCX0\"\u003e8“\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"TextRun SCXW28558532 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW28558532 BCX0\"\u003ehigh-quality\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003esteel and finished in a\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun ContextualSpellingAndGrammarErrorV2Themed SCXW17833145 BCX0\"\u003edual-stage\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003ehammer black powder coat finish, this bumper provides a sleek style to your 4Runner while offering enhanced durability and utility. For\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003eadditional\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003eoff-road protection, Rago offers a\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"TextRun Underlined SCXW17833145 BCX0\" lang=\"EN-US\" data-contrast=\"none\"\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003eheavy-duty aluminum skid plate\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"TextRun SCXW17833145 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003edesigned specifically for this center mount bumper.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Paragraph SCXW17833145 BCX0\"\u003e\u003cstrong\u003e\u003cspan class=\"TextRun SCXW17833145 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559740\":276}' class=\"EOP SCXW17833145 BCX0\"\u003eThe bumper is not compatible with the Limited trim\u003cspan data-contrast=\"auto\" lang=\"EN\" class=\"TextRun SCXW42771435 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW42771435 BCX0\"\u003e or TRD Pro front skid plate\u003c\/span\u003e\u003c\/span\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW17833145 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW17833145 BCX0\"\u003e\u003cstrong\u003e\u003cspan class=\"TextRun SCXW17833145 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003ePlease Note\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"TextRun SCXW17833145 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003e:\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"TextRun SCXW17833145 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003eThe TSS is not\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003eretained\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003eif the bumper’s top round light mounts are\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003eutilized\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW17833145 BCX0\"\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559740\":276}' class=\"EOP SCXW17833145 BCX0\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow-Profile Fitment\u003c\/li\u003e\n\u003cli\u003e(1) 30\" Single Row LED Light Bar Mount\u003c\/li\u003e\n\u003cli\u003e(4) 6\" Round Light Mounts\u003c\/li\u003e\n\u003cli\u003ePair of Cube or Rigid SRM\/Baja Designs S2 Series Light Mounts\u003c\/li\u003e\n\u003cli\u003eHidden Heavy-Duty 3\/16\" Winch Mount\u003c\/li\u003e\n\u003cli\u003e(2) 1\" Thick D-Ring Mounts\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003e1\/8\" Steel Construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_F6603630801NA.pdf?v=17817281366333683539\" target=\"_blank\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47815975633050,"sku":"F6603630801NA","price":2099.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2014-2024-Toyota-4Runner-Center-Mount-Winch-Front-Bumper-8.png?v=1776460305"},{"product_id":"rago-fabrication-2010-2024-5th-gen-toyota-4runner-molle-storage-panel-system-pair","title":"Rago Fabrication 2010-2024 5th Gen Toyota 4Runner Molle Storage Panel System | Pair","description":"\u003ch3\u003eRago Fabrication 2010-2024 5th Gen Toyota 4Runner Molle Storage Panel System | Pair\u003c\/h3\u003e\n\u003cp\u003eRago Fabrication's 5th Gen Toyota 4Runner Modular Storage Panels were designed to withstand the toughest trails and keep your items secure. The system was created to utilize the 4Runner's cargo space in the most efficient way possible. You can attach your trail gear using a variety of attachment systems including tactical solutions, bolts, straps, Quick Fists, or even zip ties. This system is easy to install and does not require any drilling or altering of your vehicle. In addition to Rago's molle panel mounted gear, many other aftermarket accessories can be secured to these panels. At the top of each panel is a mounting point for a Baja Designs dome light (not included). This can provide additional lighting in the cargo area in dark conditions.\u003c\/p\u003e\n\u003cp\u003eComplete the build by adding extra organization with the Molle Storage Shelf, available in the drop down menu.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003cem\u003e \u003c\/em\u003e\u003cspan\u003eThe MSP System was not designed to fit 4Runners with the 3rd Row seat. Passengers in the 3rd row would be put at significant risk during an accident. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes with both Driver \u0026amp; Passenger Side Molle Panels\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eNo Drilling Required\u003c\/li\u003e\n\u003cli\u003eDimensions: 30.5\" total width x 16.5\" total height\u003c\/li\u003e\n\u003cli\u003eMaterial: Panel: ⅛-inch Steel, Spacers: Billet Aluminum\u003c\/li\u003e\n\u003cli\u003ePowder Coated Textured Black\u003c\/li\u003e\n\u003cli\u003eRock Light Mount for Cargo Light Application (Light Not Included)\u003c\/li\u003e\n\u003cli\u003eAttach Your Gear with the Quick Fist Mounts\u003c\/li\u003e\n\u003cli\u003eStay Compliant with Local Off-Road Regulations with the Fire Extinguisher Mount\u003c\/li\u003e\n\u003cli\u003ePop the Top to a Cold One with the Attached Bottle Opener\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Stand-Offs\u003c\/li\u003e\n\u003cli\u003eShape Conforms to the Window and Shape of the Body\u003c\/li\u003e\n\u003cli\u003e3 Mounting Locations - Including a Wide Platform to ensure strength and reduce rattle.\u003c\/li\u003e\n\u003cli\u003eToyota D-ring #58460-35012 Recommended (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/R1017T4RUMSP-DM_InstallGuide2.pdf?v=7982831644815306290\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47830370910362,"sku":"R1017T4RUMSP-DM","price":628.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2010-2024-5th-Gen-Toyota-4Runner-Molle-Storage-Panel-System-Pair-2.png?v=1776786521"},{"product_id":"rago-fabrication-2010-2024-5th-gen-toyota-4runner-molle-storage-panel-shelf","title":"Rago Fabrication 2010-2024 5th Gen Toyota 4Runner Molle Storage Panel Shelf","description":"\u003ch3\u003eRago Fabrication 2010-2024 5th Gen Toyota 4Runner Molle Storage Panel Shelf\u003c\/h3\u003e\n\u003cp\u003eRago Fabrication 5th Gen Toyota 4Runner Molle Storage Panel Shelf was designed to provide additional cargo storage space in your 4Runner. You can attach your trail gear using a variety of attachment systems including Quick Fists, bolts, straps, zip ties, and other tactical solutions. This system is easy to install and does not require any drilling or altering of your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou must have the\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eRago Modular Storage Panels\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e(Pair) to use this item.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis shelf spans the cargo space between Rago's Molle Storage Panels, giving you two additional surfaces (top \u0026amp; bottom) to stow your gear. The shelf's height can be adjusted higher or lower along the side panels, depending on your needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eThe MSP System was not designed to fit 4Runners with the 3rd Row seat. Passengers in the 3rd row would be put at significant risk during an accident. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eNo Drilling Required\u003c\/li\u003e\n\u003cli\u003ePowder Coated Textured Black\u003c\/li\u003e\n\u003cli\u003eModular Storage Side Panels are not included\u003c\/li\u003e\n\u003cli\u003eLaser Cut and CNC Bent 1\/8\" Cold Rolled Steel\u003c\/li\u003e\n\u003cli\u003eHand Sanded to Ensure a Even Surface\u003c\/li\u003e\n\u003cli\u003eDesigned by Rago Fabrication\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47831116611738,"sku":"R1019T4RURCS","price":628.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2010-2024-5th-Gen-Toyota-4Runner-Molle-Storage-Panel-Shelf-2.png?v=1776800842"},{"product_id":"rago-fabrication-2014-2024-5th-gen-4runner-modular-factory-roof-rail-cross-bar-supports","title":"Rago Fabrication 2014-2024 5th Gen 4Runner Modular Factory Roof Rail Cross Bar Supports","description":"\u003ch3\u003eRago Fabrication 2014-2024 5th Gen 4Runner Modular Factory Roof Rail Cross Bar Supports\u003c\/h3\u003e\n\u003cp\u003e\u003cspan data-contrast=\"auto\"\u003eThese 2014+ 4Runner Roof Rail Cross Bars were designed to support the weight of roof top tents and other heavy cargo. This cargo system includes 5 crossmembers designed to evenly distribute weight across the 4Runner factory roof rails. Each cross bar features multiple mounting provisions, slots \u0026amp; bolt holes, which are designed for whatever accessories you intend to mount. Made from\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"TextRun SCXW28558532 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW28558532 BCX0\"\u003ehigh-quality\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003eplate steel, the bars are finished in a hammer black powder coat to resist weather and UV damage. These feature a bolt-on installation and are Made in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan data-contrast=\"auto\"\u003ePlease Note:\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-contrast=\"auto\"\u003e\u003cspan\u003e \u003c\/span\u003ePlease follow all the manufacturer ratings for rail capacity. Always use caution when loading the rack and take all safety precautions necessary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold in sets of 5 to Ensure Weight is Distributed Evenly\u003c\/li\u003e\n\u003cli\u003eDesigned to support Roof Top Tents and Cargo Storage Boxes\u003c\/li\u003e\n\u003cli\u003eLow Profile and Works with Factory Rails\u003c\/li\u003e\n\u003cli\u003eMultiple Accessory Mounting Points\u003c\/li\u003e\n\u003cli\u003ePlate Steel Construction\u003c\/li\u003e\n\u003cli\u003eHammer Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eNo Drilling Required for Installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47831314301082,"sku":"R14195G4RMFSS","price":1049.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2014-2024-5th-Gen-4Runner-Modular-Factory-Roof-Rail-Cross-Bar-Supports-2.png?v=1776802593"},{"product_id":"rago-fabrication-2010-2024-5th-gen-toyota-4runner-center-console-molle-storage-panel","title":"Rago Fabrication 2010-2024 5th Gen Toyota 4Runner Center Console Molle Storage Panel","description":"\u003ch3\u003eRago Fabrication 2010-2024 5th Gen Toyota 4Runner Center Console Molle Storage Panel\u003c\/h3\u003e\n\u003cp\u003eThe 4Runner Center Console Molle Storage Panels \u0026amp; Digital Device Bridge was designed to add amazing versatility to your interior. Whether you are looking for a little more storage or you want an amazing way to mount your handheld devices, this is the solution. Its low profile design will not hinder your driving experience in any way, in fact it will allow you to reach and control all your digital devices better than ever.\u003c\/p\u003e\n\u003cp\u003eTo enhance this great design, Rago engineered a very versatile bridge plate, specifically designed for the very popular Ram Mounts. We strategically placed versatile slots in both sides of the bridge plate for even more mounting options. \u003cspan\u003eThe bridge plate is placed to access all your 4 wheel drive controls and is completely removable when not needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe device mounts are compatible with Ram Diamond Base Mounts, Bulletpoint Mounting Solutions, \u0026amp; the Quad Lock Systems\/Base Plates. Accessory mounting holes are spaced 1.9-inches\/48.5mm apart (AMPS Standard).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKit Includes: Two Side Panels, One Bridge Plate\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware is Included\u003c\/li\u003e\n\u003cli\u003eDrilling is Required For Mounting This Product\u003c\/li\u003e\n\u003cli\u003ePowder Coated Textured Black\u003c\/li\u003e\n\u003cli\u003eDoes NOT include Accessory Hardware -\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eHole Size | Side Panels: 1\/4X20, Bridge: 10-24\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47831370760346,"sku":"R1019T4RUNCCMP-P","price":480.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2010-2024-5th-Gen-Toyota-4Runner-Center-Console-Molle-Storage-Panel-2.png?v=1776805923"},{"product_id":"rago-fabrication-2010-2024-5th-gen-toyota-4runner-low-profile-ditch-light-brackets","title":"Rago Fabrication 2010-2024 5th Gen Toyota 4Runner Low Profile Ditch Light Brackets","description":"\u003ch3\u003eRago Fabrication 2010-2024 5th Gen Toyota 4Runner Low Profile Ditch Light Brackets\u003c\/h3\u003e\n\u003cp\u003eDitch Light Brackets give you the ability to run aftermarket LED lights on the hood of your 4Runner. Each bracket provides a low-profile, clean look. The brackets do not interfere with the function of the hood opening or closing. These will fit if you have a snorkel installed. Installation is simply bolt-on and does not require any drilling. Minimal trimming of the wiper cowl has been reported in some cases. These brackets are sold in pairs.\u003c\/p\u003e\n\u003cp\u003eEvery bracket is designed by Rago Fabrication using state of the art CAD techniques, and cut on their 3K Fiber Optic Laser. This allows them the tightest tolerances possible and gives their products the best quality allowable. Every product is ceramic tumbled for a smooth finish and then powder coated black for a look that can not be beat!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo Drilling Required\u003c\/li\u003e\n\u003cli\u003eWorks with Snorkel Installed\u003c\/li\u003e\n\u003cli\u003eBolts on Hood Hinge\u003c\/li\u003e\n\u003cli\u003eLow Profile Clean Look\u003c\/li\u003e\n\u003cli\u003ePowder coated Black Textured Black\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47831498293402,"sku":"R1000T4RUDIT-LP","price":157.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2010-2024-5th-Gen-Toyota-4Runner-Low-Profile-Ditch-Light-Brackets-2.png?v=1776808848"},{"product_id":"rago-fabrication-2010-2024-5th-gen-toyota-4runner-ditch-light-brackets","title":"Rago Fabrication 2010-2024 5th Gen Toyota 4Runner Ditch Light Brackets","description":"\u003ch3\u003eRago Fabrication 2010-2024 5th Gen Toyota 4Runner Ditch Light Brackets\u003c\/h3\u003e\n\u003cp\u003eEvery 4Runner Ditch Light Bracket is designed by Rago Fabrication using state of the art Computer Aid Of Drafting techniques and cut on Rago's 3K Fiber Optic Laser. This allows them the tightest tolerances possible and gives their products the best quality allowable. Made in the USA by their highly trained staff, each bracket is ceramic tumbled for a smooth finish and then powder coated black for a look that can not be beat!\u003c\/p\u003e\n\u003cp\u003eDitch Light Brackets give you the ability to run aftermarket LED lights on the hood of your 4Runner. Each bracket provides a sleek profile and clean look. The brackets do not interfere with the function of the hood opening or closing. They also fit with a snorkel installed. Installation is a simple bolt-on process and does not require any drilling. These brackets are sold in pairs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo Drilling or Trimming Required\u003c\/li\u003e\n\u003cli\u003eBolts on Hood Hinge\u003c\/li\u003e\n\u003cli\u003eCompatible with Snorkels\u003c\/li\u003e\n\u003cli\u003eLow Profile Clean Look\u003c\/li\u003e\n\u003cli\u003ePowder Coated Textured Black\u003c\/li\u003e\n\u003cli\u003ePatent Number D796938\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47834102825114,"sku":"R1000T4RUDIT","price":157.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2010-2024-5th-Gen-Toyota-4Runner-Ditch-Light-Brackets-2.png?v=1776870384"},{"product_id":"rago-fabrication-2010-2024-toyota-4runner-the-surge-auxiliary-under-hood-power-station","title":"Rago Fabrication 2010-2024 Toyota 4Runner The Surge Auxiliary Under-Hood Power Station","description":"\u003ch3\u003eRago Fabrication 2010-2024 Toyota 4Runner The Surge Auxiliary Under-Hood Power Station\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eIf you're running an Air Up\/Down System, you really only have two options for mounting your compressor. Behind the Fuse Box, or on the passenger side of your engine bay. This can be a big issue, especially if you're still wanting to run a dual battery system and a central power station. The only logical thing to do, was to create a central power station in an unexpected location, so you can have it all. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Surge is a an all inclusive power station that allows you to run electrical in the front of your engine bay while adding more electrical options in your 4Runner. By having this plate, you can run a compressor mount above the fuse box, a secondary battery system on the passenger side, and up to a G\u003c\/span\u003e\u003cspan\u003eroup 31 Battery in factory location. This plate is specifically designed to hold the Blue Sea System and an additional Switch Pros SP9100.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e The surge station does not come with any additional accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes NOT work with Factory Fluid Reservoir - Must have Rago Fabrication's Aqua Tank\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from 1\/8\" Aluminum\u003c\/li\u003e\n\u003cli\u003eFitment is for 2014-23 5th Gen 4Runner ONLY\u003c\/li\u003e\n\u003cli\u003eAdds more electrical options\u003c\/li\u003e\n\u003cli\u003eMounts with Blue Sea System\u003c\/li\u003e\n\u003cli\u003eAllows you to mount an additional Switch Pro SP9100 \u003cstrong\u003esold separately\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes NOT work with Factory Fluid Reservoir - Must have\u003cspan\u003e \u003c\/span\u003eAqua Tank\u003c\/li\u003e\n\u003cli\u003eDrilling Required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47834279084186,"sku":"R1022T4RPTPS","price":173.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2010-2024-Toyota-4Runner-The-Surge-Auxiliary-Under-Hood-Power-Station-6.png?v=1776873689"},{"product_id":"rago-fabrication-2010-2024-toyota-4runner-the-aqua-tank-washer-fluid-reservoir","title":"Rago Fabrication 2010-2024 Toyota 4Runner The Aqua Tank Washer Fluid Reservoir","description":"\u003ch3\u003eRago Fabrication 2010-2024 Toyota 4Runner The Aqua Tank Washer Fluid Reservoir Replacement\u003c\/h3\u003e\n\u003cp\u003eThe Aqua Tank is a full washer fluid reservoir replacement that mounts snugly behind the grille of your 4Runner - Made out of 100% aluminum and tig welded for years of service. This system uses factory pumps and connections that have been sealed and pressure tested for optimum use. This product also features a Billet Aluminum threaded cap, fabricated in the USA. The install is extremely simple, and takes about 10 minutes start to finish. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Aqua Tank was designed to solve a common problem amongst Toyota 4Runner owners. After upgrading your tires and bumper, your plastic factory washer fluid tank is now exposed and prone to damage on the trails - not to mention it doesn't allow for optimum tire clearance when stuffing those big 35-inch tires under the fender. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFitment is for 2014-2023 5th Gen 4Runner ONLY\u003c\/li\u003e\n\u003cli\u003eHolds 2 liters of washer fluid\u003c\/li\u003e\n\u003cli\u003eUses factory pump and connections\u003c\/li\u003e\n\u003cli\u003eMade from Aerospace Aluminum\u003c\/li\u003e\n\u003cli\u003eSealed and pressure tested\u003c\/li\u003e\n\u003cli\u003eRelocates behind grille\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum threaded cap\u003c\/li\u003e\n\u003cli\u003eAllows for additional tire clearance\u003c\/li\u003e\n\u003cli\u003eReplaces plastic factory washer fluid tank\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47834374570138,"sku":"R1622T4RWB","price":481.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2010-2024-Toyota-4Runner-TheAqua-Tank-Washer-Fluid-Reservoir-2.png?v=1776883738"},{"product_id":"rago-fabrication-2014-2024-toyota-4runner-skid-plate-for-center-mount-front-bumpers","title":"Rago Fabrication 2014-2024 Toyota 4Runner Skid Plate for Center Mount Front Bumpers","description":"\u003ch3\u003eRago Fabrication 2014-2024 Toyota 4Runner Skid Plate for Center Mount Front Bumpers\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan data-contrast=\"auto\" lang=\"EN-US\" class=\"TextRun SCXW171664599 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW171664599 BCX0\"\u003eThe 5th Gen 4Runner Skid Plate pairs with Rago's\u003c\/span\u003e\u003cspan class=\"NormalTextRun ContextualSpellingAndGrammarErrorV2Themed SCXW171664599 BCX0\"\u003e 4Runner Standard and \u003c\/span\u003e\u003c\/span\u003e\u003cspan data-contrast=\"none\" lang=\"EN-US\" class=\"TextRun Underlined SCXW171664599 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW171664599 BCX0\"\u003eTop Hoop Center Mount Winch Front Bumpers\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-contrast=\"auto\" lang=\"EN-US\" class=\"TextRun SCXW171664599 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW171664599 BCX0\"\u003e for \u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW171664599 BCX0\"\u003eadditional\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW171664599 BCX0\"\u003e front undercarriage protection from damage caused by rocks, shrubs, and debris. Made from heavy-duty 3\/\u003c\/span\u003e\u003cspan class=\"NormalTextRun ContextualSpellingAndGrammarErrorV2Themed SCXW171664599 BCX0\"\u003e16“ aluminum\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW171664599 BCX0\"\u003e, this skid is designed to deflect impacts and shield the front of your rig from obstacles \u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW171664599 BCX0\"\u003eencountered\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW171664599 BCX0\"\u003e during off-road excursions or regular \u003c\/span\u003e\u003cspan class=\"NormalTextRun ContextualSpellingAndGrammarErrorV2Themed SCXW171664599 BCX0\"\u003eeveryday\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW171664599 BCX0\"\u003e travels. This skid plate is finished in a resilient satin black powder coat that complements the factory styling.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Rago’s 4Runner Center Mount Winch Front Bumpers\u003c\/li\u003e\n\u003cli\u003eSatin Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003e3\/16“ Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC6606903NA.pdf?v=12060808787557344653\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47838917722266,"sku":"AC6606903NA","price":524.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2014-2024-Toyota-4Runner-Skid-Plate-for-Center-Mount-Front-Bumpers-2.png?v=1776957427"},{"product_id":"rago-fabrication-clevis-mounted-license-plate-bracket","title":"Rago Fabrication Clevis Mounted License Plate Bracket","description":"\u003ch3\u003eRago Fabrication Clevis Mounted License Plate Bracket\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan data-contrast=\"auto\" lang=\"EN-US\" class=\"TextRun SCXW171664599 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW171664599 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW247347831 BCX0\"\u003eThe Clevis D-Ring Mounted Front License Plate Bracket was designed to easily mount a front license plate bracket on an off-road bumper. It is also easily removable for \u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW247347831 BCX0\"\u003eoptimal\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW247347831 BCX0\"\u003e ground clearance when going off-road. If left installed while off-road, it will swivel if you strike an obstacle to help prevent damaging the mount. It is adjustable for universal clevis mount \u003c\/span\u003e\u003cspan class=\"NormalTextRun ContextualSpellingAndGrammarErrorV2Themed SCXW247347831 BCX0\"\u003efitment, and\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW247347831 BCX0\"\u003e can also be configured for different heights. The mount is finished in a durable 2-stage hammer-black powder \u003c\/span\u003e\u003cspan class=\"NormalTextRun ContextualSpellingAndGrammarErrorV2Themed SCXW247347831 BCX0\"\u003ecoat, and\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW247347831 BCX0\"\u003e is made in \u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW247347831 BCX0\"\u003ethe USA.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounts to D-Ring Mounts with 1” Hole\u003c\/li\u003e\n\u003cli\u003ePerfect for Front License Plates\u003c\/li\u003e\n\u003cli\u003eEasily Removable for the Trails\u003c\/li\u003e\n\u003cli\u003eMount Swivels in Case of Contact with Obstacles Off-Road\u003c\/li\u003e\n\u003cli\u003eAdjustable for Universal Fitment\u003c\/li\u003e\n\u003cli\u003eMounting Configurations for Different Heights\u003c\/li\u003e\n\u003cli\u003eIncludes Stainless Steel Hardware\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC9905201NA.pdf?v=5815564597223746833\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47838938366106,"sku":"AC9905201NA","price":174.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-Clevis-Mounted-License-Plate-Bracket-2.png?v=1776957809"},{"product_id":"rago-fabrication-2010-2024-toyota-4runner-modular-device-dash-mount","title":"Rago Fabrication 2010-2024 Toyota 4Runner Modular Device Dash Mount","description":"\u003ch3\u003eRago Fabrication 2010-2024 Toyota 4Runner Modular Device Dash Mount\u003c\/h3\u003e\n\u003cp\u003eThe Toyota 5th Gen 4Runner Modular Dash Mount was designed to add amazing versatility to your 4Runner's interior. This product was designed to be low profile and blend in with the dash, while still keeping visibility of the clock. This mount allows you to attach multiple accessories to customize your overlanding needs. Phone holders, GPS holders, Tablet holders, \u0026amp; other device mounts can be attached to the top of the plate utilizing 7 holes that take standard 10\/24 hardware. The device mounts are compatible with Ram Diamond Base Mounts, Bulletpoint Mounting Solutions, \u0026amp; the Quad Lock Systems\/Base Plates. Accessory mounting holes are spaced 1.9-inches\/48.5mm apart (AMPS Standard).\u003c\/p\u003e\n\u003cp\u003eEach Mount will include 2 Adjustable Accessory Mounts for both the Driver and Passenger side so you can attach a Ham Radio or any magnetic mount for your devices.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDrilling is required for installing this product. All mounting hardware is included. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrilling Required for Install\u003c\/li\u003e\n\u003cli\u003eDoes NOT include 10-24 Accessory Hardware - Purchase in Drop Down options\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Spacers\u003c\/li\u003e\n\u003cli\u003eIncludes 2 Adjustable Accessory Mounts for a Ham Radio or Magnetic Mounts which can be mounted flush with the Dash Plate or above the Dash Plate\u003c\/li\u003e\n\u003cli\u003ePowder Coated Textured Black\u003c\/li\u003e\n\u003cli\u003eLaser Cut and CNC Bent P\u0026amp;O Steel\u003c\/li\u003e\n\u003cli\u003eHand Sanded to Ensure a Even Surface\u003c\/li\u003e\n\u003cli\u003eOur device mounts are compatible with Ram Diamond Base Mounts, Bulletpoint Mounting Solutions, \u0026amp; the Quad Lock Systems\/Base Plates.\u003c\/li\u003e\n\u003cli\u003eAccessory mounting holes are spaced 1.9-inches\/48.5mm apart (AMPS Standard).Accessory mounting holes are spaced 1.9-inches\/48.5mm apart (AMPS Standard).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47838950359194,"sku":"R1020T4RDPLT","price":228.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2010-2024-Toyota-4Runner-Modular-Device-Dash-Mount-2.png?v=1776963602"},{"product_id":"rago-fabrication-the-12-volt-blue-sea-systems-12v-accessory-panel-mount","title":"Rago Fabrication The 12 Volt | Blue Sea Systems 12v Accessory Panel Mount","description":"\u003ch3\u003eRago Fabrication The 12 Volt | Blue Sea Systems 12v Accessory Panel Mount\u003c\/h3\u003e\n\u003cp\u003eThe 12 Volt was designed to house the Blue Sea Systems 4366 or 4365-BSS 12v Accessory Panel (Not Included), and can be mounted on Rago's modular molle panels in just about any position you'd like. It can be mounted vertically on a side panel, or horizontally on the MSP shelf. The 12 Volt can also be mounted on any flat surface. The housing is made from 14 gauge steel and finished with a black powder coat, protecting the panel from damage.\u003c\/p\u003e\n\u003cp\u003eWhy walk back and forth to the front of your rig to access 12v DC power, when you can place those power ports anywhere with The 12 Volt?\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to fit the\u003cspan\u003e \u003c\/span\u003eBlue Sea Systems 4366 Water-Resistant Accessory Panel\u003cspan\u003e \u003c\/span\u003e- Circuit Breaker, 12V Socket, Dual USB Charger, Mini Voltmeter\u003c\/li\u003e\n\u003cli\u003eDesigned to fit the\u003cspan\u003e \u003c\/span\u003eBlue Sea Systems 4365-BSS Water-Resistant Accessory Panel\u003cspan\u003e \u003c\/span\u003e- Circuit Breaker, 12V Socket, 2x Dual USB Chargers\u003c\/li\u003e\n\u003cli\u003eCan fit vertically or horizontally on any Rago Molle Panel, as well as any other flat mounting service. (horizontal will require fender washers that are provided)\u003c\/li\u003e\n\u003cli\u003ePowder Coat Textured Black\u003c\/li\u003e\n\u003cli\u003eMade from 14 gauge steel\u003c\/li\u003e\n\u003cli\u003eIncludes 10x24 bolts for easy mounting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47839270142106,"sku":"R0000BLSE4365","price":188.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-The-12-Volt-Blue-Sea-Systems-12v-Accessory-Panel-Mount-3.png?v=1776965493"},{"product_id":"rago-fabrication-the-wifey-air-system","title":"Rago Fabrication The \"Wifey\" Air System","description":"\u003ch3\u003eRago Fabrication The \"Wifey\" Air System\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePROFESSIONAL INSTALLATION IS HIGHLY RECOMMENDED.\u003c\/strong\u003e\u003c\/span\u003e This is not the average DIY project and you should have experience and understanding of plumbing and air systems. This kit will take all the guesswork out of sourcing each part. In addition, these parts have been tested to their limits and continue to operate flawlessly.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePLEASE NOTE:\u003c\/strong\u003e\u003c\/span\u003e To complete a full air-up\/down system, you will need to purchase a Rago ARB Compressor Mount, Air Mounts (optional), Wifey Block Mounts, \u0026amp; ARB Compressor.\u003c\/p\u003e\n\u003cp\u003eThis system will allow you to air-up all 4 tires under 4-9 minutes using Rago's 3\/8-inch high flow air lines. (Tire inflation times depend on tire size, original pressure and single or duel ARB air compressor used). Included in this expansive kit is everything needed to see gauged tire pressure to all 4 wheels when the system is hooked up. Deflate all 4 tires at the same time getting you back on the trail as fast as possible. Components of the kit include braded stainless steel inlet line, solid brass fittings and chucks, billet aluminum distribution block, high quality slide valves, and 3\/8-inch high flow air lines.\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eChoose between the SUV version or Truck Version\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eSUV- 120\" Wheel Base\u003c\/div\u003e\n\u003cdiv\u003eTruck - 120\"+ Wheel Base\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: INSTALLATION INSTRUCTIONS WILL NOT BE PROVIDED\u003c\/strong\u003e. However, you may review the install done by \"sponsoredbywifey\" on YouTube.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eList of Hardware Included in Package\u003c\/li\u003e\n\u003cli\u003eHigh Quality Parts and Hardware Included\u003c\/li\u003e\n\u003cli\u003eAir up \u0026amp; down in as little as 7-9 minutes\u003c\/li\u003e\n\u003cli\u003eConnects to either Twin or Single ARB Air Compressor\u003c\/li\u003e\n\u003cli\u003eBlue Hose Rated for 170psi\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1220\/2430\/files\/Valve_Data_Sheet.pdf?v=1689180715\" target=\"_blank\"\u003eDownload the Valve Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Truck","offer_id":47840071843994,"sku":"R70FTWIFEYAIRSYSTEM","price":566.91,"currency_code":"CAD","in_stock":true},{"title":"SUV","offer_id":47840071876762,"sku":"R60FTWIFEYAIRSYSTEM","price":566.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-The-Wifey-Air-System-5.png?v=1776974608"},{"product_id":"rago-fabrication-2010-2024-toyota-4runner-air-compressor-mount","title":"Rago Fabrication 2010-2024 Toyota 4Runner Air Compressor Mount","description":"\u003ch3\u003eRago Fabrication 2010-2024 Toyota 4Runner Air Compressor Mount\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eWhen you hit the trails, most of us air down our tires for a smoother ride over large rocks. When it's time to head home, having an on-board air compressor enables you to air-up and hit the highway in as fast as 4 minutes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis 4Runner Air Compressor Bracket is CAD designed by Rago Fabrication, and laser cut out of aluminum. It can mount either an ARB Single or Twin Air compressor. There is also a mounting location for the Switch Pros SP9100. It has a very simple installation that is roughly 15 minutes start to finish. The installation will not require any trimming, drilling, or modification of your vehicle except for 2020-2023 model years.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003cli\u003eWifey Block Mount\u003cspan\u003e \u003c\/span\u003eSold Separately\u003c\/li\u003e\n\u003cli\u003eNo Drilling Required\u003c\/li\u003e\n\u003cli\u003eFits the\u003cspan\u003e \u003c\/span\u003eARB Single Air Compressor\u003cspan\u003e \u003c\/span\u003eand the\u003cspan\u003e \u003c\/span\u003eARB Twin Compressor\u003c\/li\u003e\n\u003cli\u003eFits with the\u003cspan\u003e \u003c\/span\u003eSwitch Pros SP9100\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47840084164762,"sku":"R1418TT4RARB","price":212.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2010-2024-Toyota-4Runner-Air-Compressor-Mount-3.png?v=1776975345"},{"product_id":"rago-fabrication-wifey-block-mount","title":"Rago Fabrication Wifey Block Mount","description":"\u003ch3\u003eRago Fabrication Wifey Block Mount\u003c\/h3\u003e\n\u003cp\u003eThe perfect solution for mounting your Wifey Air System manifold! Combine this mount with any of Rago's Air Compressor Mounts and Wifey Air System to air up\/down all 4 tires at once. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eEvery bracket is CAD designed by Rago Fabrication and laser cut out of stainless steel.  Very SIMPLE install that is roughly 15 minutes start to finish. The installation will not require ANY trimming, drilling, or modification of your vehicle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuick \u0026amp; Easy Bolt-On Install\u003c\/li\u003e\n\u003cli\u003eMounts Directly to any of our Air Compressor Mounts\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware is Included\u003c\/li\u003e\n\u003cli\u003eStainless Steel\u003c\/li\u003e\n\u003cli\u003eNo Trimming or Drilling Required\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"4th \u0026 5th Gen 4Runner\/GX470\/2nd Gen Tundra","offer_id":47842430681242,"sku":"R1418T4RUWIFEY","price":94.41,"currency_code":"CAD","in_stock":true},{"title":"2nd \u0026 3rd Gen Tacoma","offer_id":47842430714010,"sku":"R1619TTAC3GWIFEY","price":94.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-Wifey-Block-Mount-2.png?v=1777040676"},{"product_id":"rago-fabrication-2010-2024-toyota-4runner-lexus-gx470-air-mounts-set-of-4","title":"Rago Fabrication 2010-2024 Toyota 4Runner \u0026 Lexus GX470 Air Mounts | Set of 4","description":"\u003ch3\u003eRago Fabrication 2010-2024 Toyota 4Runner \u0026amp; Lexus GX470 Air Mounts | Set of 4\u003c\/h3\u003e\n\u003cp\u003eAir Mounts are essential when setting up an on-board air system like Rago's Wifey Air System. They are easily installed using factory holes in your wheel well, while some models require minimal drilling of the holes. Nevertheless, the install is simple! With these Air Mounts you can make a fast hose connection to your compressor which means you can get back on the road in no time. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThese were not designed for the TRD PRO, and would require modification to fit that model.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMinimal Drilling Required to Install\u003c\/li\u003e\n\u003cli\u003eStainless Steel\u003c\/li\u003e\n\u003cli\u003eRust Free Guarantee\u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003cli\u003eMade for the Wifey Air System\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47842431959194,"sku":"R1418WIFEYAIRMOUNT-4RU","price":62.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2010-2024-Toyota-4Runner-Lexus-GX470-Air-Mounts-Set-of-4-3.png?v=1777041010"},{"product_id":"rago-fabrication-2010-2024-toyota-4runner-secondary-battery-box","title":"Rago Fabrication 2010-2024 Toyota 4Runner Secondary Battery Box","description":"\u003ch3\u003eRago Fabrication 2010-2024 Toyota 4Runner Secondary Battery Box\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eWhether you are running dual batteries to power your overland accessories or using it as a back up to your main battery, you're going to want to keep that battery safe at all costs. Rago's 4Runner Secondary Battery Box is m\u003c\/span\u003e\u003cspan\u003eade from strong, rust-free stainless steel, and offers protection on all sides of your Group 34 or 35 battery. TIG-welded for a precise, snug fit, you can be sure your battery will be virtually unmovable. Integrated into this design are mounting points for the ARB Differential Axle Breather Kit, Blue Sea System or Red Arc automatic charging relay, and includes zip tie slots for clean and secure mounting of your battery cables.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRust-Free Stainless Steel\u003c\/li\u003e\n\u003cli\u003eEasy Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Included\u003c\/li\u003e\n\u003cli\u003eAbility to Mount the ARB Differential Axle Breather Kit\u003c\/li\u003e\n\u003cli\u003eIncludes a Mounting Plate for Automatic Charging Relays\u003c\/li\u003e\n\u003cli\u003eZip-Tie Slots For Clean \u0026amp; Secure Mounting of Cables\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47842435596442,"sku":"R1019T4RUPSBB","price":393.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2010-2024-Toyota-4Runner-Secondary-Battery-Box-5.png?v=1777041339"},{"product_id":"rago-fabrication-2010-2024-toyota-4runner-lexus-gx470-relay-holder","title":"Rago Fabrication 2010-2024 Toyota 4Runner \u0026 Lexus GX470 Relay Holder","description":"\u003ch3\u003eRago Fabrication 2010-2024 Toyota 4Runner \u0026amp; Lexus GX470 Relay Holder\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe Rago Fabrication relay holder allows you to organize up to (3) relays* neatly on this simple bracket. The bracket is completely bolt-on for the Lexus GX470 \u0026amp; 2010-2024 4Runner. These are strong and easy install for a clean install. All hardware for install is included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll Hardware is Included\u003c\/li\u003e\n\u003cli\u003ePowder Coated Textured Black\u003c\/li\u003e\n\u003cli\u003eCompatible with Lexus GX470 \u0026amp; 2010-2024 4Runner\u003c\/li\u003e\n\u003cli\u003ePatent Num. US, 787, 918 S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47842440151194,"sku":"R1600T4RUREL","price":39.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2010-2024-Toyota-4Runner-Lexus-GX470-Relay-Holder-1.png?v=1777041571"},{"product_id":"rago-fabrication-2010-2024-toyota-4runner-cb-antenna-or-whip-flag-mount","title":"Rago Fabrication 2010-2024 Toyota 4Runner CB Antenna or Whip Flag Mount","description":"\u003ch3\u003eRago Fabrication 2010-2024 Toyota 4Runner CB Antenna or Whip Flag Mount\u003c\/h3\u003e\n\u003cp\u003eYou wanted simple mounting solutions for your CB antennas, and Rago responded with a big 10-4! With the Rago Fabrication Antenna Mount, you get the best of both worlds with this sleek yet rugged powder coated steel design. Designed to fit your vehicle to create a non-intrusive mount for your antenna.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Rago Fabrication CB Antenna Mount is a simple way to mount your CB Antenna at the rear end of a 2010-2023 5th Gen Toyota 4Runner using pre-installed rivet nuts and a support plate. In place of a CB antenna, a ATV\/UTV sized whip flag can be installed for trails where it's required.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3\/16\" Steel, Rust Free\u003c\/li\u003e\n\u003cli\u003eSuitable for ATV\/UTV Sized Whip Flags only\u003c\/li\u003e\n\u003cli\u003ePowder Coated Textured Black\u003c\/li\u003e\n\u003cli\u003eAll Hardware is Included\u003c\/li\u003e\n\u003cli\u003eRequires Drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_Fabrication_Tacoma_CB_Antenna_Mount_4Runner_5th_Gen.pdf?v=7730499527813907425\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47842886025370,"sku":"R1017T4RUCB-D","price":110.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2010-2024-Toyota-4Runner-CB-Antenna-or-Whip-Flag-Mount-6.png?v=1777053093"},{"product_id":"rago-fabrication-2010-2024-toyota-4runner-lower-shock-guard","title":"Rago Fabrication 2010-2024 Toyota 4Runner Lower Shock Guard","description":"\u003ch3\u003eRago Fabrication 2010-2024 Toyota 4Runner Lower Shock Guard\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan class=\"TextRun SCXW171664599 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW171664599 BCX0\"\u003eYou built up your suspension system so you can use it, am I right? Increase the longevity of your shocks and keep them free from damage with Rago Fabrication shock guards. The rugged angular design creates a guard that can withstand the most demanding trails. In addition to protecting the most exposed part of the shock, the guard also extends to protect the shock shaft from pits and abuse, extending shock life from leaks and tears of the shock shaft seal. Rago's design also includes a drain hole placed at the lowest point of the guard to prevent lingering of water during water crossings.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3\/16th Steel\u003c\/li\u003e\n\u003cli\u003ePowder Coated Black\u003c\/li\u003e\n\u003cli\u003eCompatible with Radflo Shocks, Bilstein 5160s, Stock GX 460 Shocks, Most Fox Shocks, Old Man Emu, \u0026amp; Rancho\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with TRD Pro that have the OEM Fox Shocks or Off Set RTT Shocks or the Icon RXT Style Shock\u003c\/li\u003e\n\u003cli\u003eCompletely bolt-on, No drilling required\u003c\/li\u003e\n\u003cli\u003eAll hardware included\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47843054518426,"sku":"R1019T4RURSG","price":251.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2010-2024-Toyota-4Runner-Lower-Shock-Guard-2.png?v=1777056486"},{"product_id":"rago-fabrication-2014-2024-toyota-4runner-universal-led-hidden-bumper-bracket","title":"Rago Fabrication 2014-2024 Toyota 4Runner Universal LED Hidden Bumper Bracket","description":"\u003ch3\u003eRago Fabrication 2014-2024 Toyota 4Runner Universal LED Hidden Bumper Bracket\u003c\/h3\u003e\n\u003cp\u003eThese brackets allow you to mount LED light bars and pods in the lower bumper of a 5th Gen Toyota 4Runner. They are made from\u003cspan\u003e \u003c\/span\u003e\u003cspan data-contrast=\"auto\" lang=\"EN-US\" class=\"TextRun SCXW28558532 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW28558532 BCX0\"\u003ehigh-quality\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003esteel and manufactured in the deserts of Arizona.\u003cspan\u003e They're finished in a hammer black powder coat, and able to withstand harsh weather conditions. The brackets feature a very simple install that is roughly 45 minutes start to finish. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can run multiple bars and or pods using different configurations. The Hidden Bumper Brackets will allow you to mount a 30-32-inch LED light bars. You can also purchase Rago's mounting plate to increase your options for multiple LED bar lengths. The LED light bars cannot exceed 32\" for proper fit. A curved bar will not install correctly behind the bumper and should not be used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Please note the following prior to purchase\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis product does not work for the Limited as the front bumper is a different design. There is not a Bumper Bracket for a Limited.\u003c\/li\u003e\n\u003cli\u003eDoes not fit with the Hidden Winch Mount.\u003c\/li\u003e\n\u003cli\u003eWill fit the 2020-2024, however, you will need to avoid the TSS Sensor with the installed lights. Rago recommends the brackets with the mounting plate with two light pods on either side of the TSS.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003cli\u003eHigh-Quality Steel\u003c\/li\u003e\n\u003cli\u003ePowder coated Textured Black\u003c\/li\u003e\n\u003cli\u003eNo Drilling or Trimming (*for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUniversal Hidden Bumper LED Brackets + Outside Mount\u003c\/strong\u003e, Trimming MAYBE Required Depending on Light Configuration and Manufacturer)\u003c\/li\u003e\n\u003cli\u003eCompletely Bolt- On (*\u003cstrong\u003eUniversal Hidden Bumper LED Brackets + Outside Mount\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis not bolt on)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Hidden Bumper LED Brackets\u003c\/strong\u003e: Fit Most 30-32\" Single and Dual Row LED Bars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Hidden Bumper LED Brackets + Mounting Plate\u003c\/strong\u003e: Allows You to Mount Round Lights, Pods, and Bars Less than 30\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Hidden Bumper LED Brackets + Mounting Plate\u003c\/strong\u003e: Required to have the Rago Universal Hidden Bumper Brackets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Hidden Bumper LED Brackets + Outside Mount\u003c\/strong\u003e: Allows You to Mount Most LED Bars 30\"-32\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47843057795226,"sku":"R1000T4RUHBBA-SS","price":212.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-2014-2024-Toyota-4Runner-Universal-LED-Hidden-Bumper-Bracket-3.png?v=1777057921"},{"product_id":"rago-fabrication-mounting-plate-for-universal-hidden-bumper-brackets","title":"Rago Fabrication Mounting Plate for Universal Hidden Bumper Brackets","description":"\u003ch3\u003eRago Fabrication Mounting Plate for Universal Hidden Bumper Brackets\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eRago's \u003ca href=\"https:\/\/kraveautomotive.ca\/products\/rago-fabrication-2014-2024-toyota-4runner-universal-led-hidden-bumper-bracket\" target=\"_blank\" rel=\"noopener\"\u003eUniversal Hidden Bumper Brackets\u003c\/a\u003e together with this Mounting Plate will allow you to mount LED light bars and pods in the lower bumper of a 5th Gen Toyota 4Runner. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eYou can run multiple bars and\/or pods using different configurations. The Hidden Bumper Brackets will allow you to mount a 30- to 32-inch light bar. This mounting plate allows you to increase your mounting options for multiple LED bar lengths smaller than 30-inch or multiple pod lights. A curved bar will not install correctly behind the bumper and should not be used. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003cli\u003eNo Drilling or Trimming\u003c\/li\u003e\n\u003cli\u003eMust have the\u003cspan\u003e \u003c\/span\u003eRago Universal Hidden Bumper Brackets\u003cspan\u003e \u003c\/span\u003eto Install\u003c\/li\u003e\n\u003cli\u003eCompletely Bolt- On\u003c\/li\u003e\n\u003cli\u003eAllows You to Mount Round Lights, Pods, and Bars Less than 30\"\u003c\/li\u003e\n\u003cli\u003ePowder coated Textured Black\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47843087614106,"sku":"R0200T4RUHBMB-SS","price":157.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-Mounting-Plate-for-Universal-Hidden-Bumper-Brackets-1.png?v=1777058438"},{"product_id":"rago-fabrication-heavy-duty-group-31-battery-box","title":"Rago Fabrication Heavy Duty Group 31 Battery Box","description":"\u003ch3\u003eRago Fabrication Heavy Duty Group 31 Battery Box\u003c\/h3\u003e\n\u003cp class=\"product_name\"\u003e\u003cstrong\u003eUniversal Fit | Grade 304 Stainless Steel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMade from strong, aircraft grade 304 stainless steel, the Rago Battery Box offers protection on all sides of your Group 31 Battery. Most other brands are made from weaker, aluminum alloys. TIG-welded for a precise, snug fit, the Battery Box is easy to install and includes all the stainless steel hardware. This was designed to handle constant, rough terrain.\u003c\/p\u003e\n\u003cp\u003eThis stainless steel battery box was designed for heavy use off-road\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eon vehicles like the 4Runner, Tundra, Tacoma, and many other trucks \u0026amp; SUVs\u003c\/span\u003e. Other applications include race vehicles, classic cars, boats, and trailers. Some vehicles may require additional hardware, such as long threaded J-style battery bolts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from Grade 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003eCompatible with Many Vehicles\u003c\/li\u003e\n\u003cli\u003eRust-Free Guarantee\u003c\/li\u003e\n\u003cli\u003eAll Hardware is Included\u003c\/li\u003e\n\u003cli\u003eProtects your Battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThis battery box is designed to install with the factory J-style battery bolts. Depending on model of vehicle, the threads on the factory J-style bolt might not have the adequate thread length to secure the battery. Replacement J hooks might be necessary and can be found at any auto parts store.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFits MOST Group 34 batteries. Tested with Odyssey Group 34 battery.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47843103506586,"sku":"R0000BATBOXGP31","price":332.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-Heavy-Duty-Group-31-Battery-Box-4.png?v=1777058830"},{"product_id":"rago-fabrication-heavy-duty-group-34-battery-box","title":"Rago Fabrication Heavy Duty Group 34 Battery Box","description":"\u003ch3\u003eRago Fabrication Heavy Duty Group 34 Battery Box\u003c\/h3\u003e\n\u003cp class=\"product_name\"\u003e\u003cstrong\u003eUniversal Fit | Grade 304 Stainless Steel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSo you've upgraded your battery but have you got the perfect box to keep it secure?\u003c\/p\u003e\n\u003cp\u003eMade from heavy-duty, aircraft grade 304 stainless steel, the Rago Battery Box offers protection on all sides of your Group 34 battery. TIG-welded for a precise, snug fit, the Battery Box is easy to install and includes stainless steel hardware. Its rust-free stainless steel construction ensures you battery stays secure on even the toughest of trails.\u003c\/p\u003e\n\u003cp\u003eThis is perfect for an overland build that will see constant off-road use on vehicles like the 4Runner, Tundra, Tacoma, and other trucks \u0026amp; SUVs. Other applications include classic cars, racing vehicles, trailers, and marine use. Some vehicles may require additional hardware, such as J-style bolts with longer threading.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from Grade 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003eCompatible with Many Vehicles\u003c\/li\u003e\n\u003cli\u003eRust-Free Guarantee\u003c\/li\u003e\n\u003cli\u003eAll Hardware Included\u003c\/li\u003e\n\u003cli\u003eQuick \u0026amp; Easy Install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThis battery box is designed to install with the factory J-style battery bolts. Depending on model of vehicle, the threads on the factory J-style bolt might not have the adequate thread length to secure the battery. Replacement J hooks might be necessary and can be found at any auto parts store.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFits MOST Group 34 batteries. Tested with Odyssey Group 34 battery.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47843117695130,"sku":"R0000BATBOXGP34","price":283.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-Heavy-Duty-Group-34-Battery-Box-5.png?v=1777059472"},{"product_id":"rago-fabrication-5-gallon-gas-jug-holder","title":"Rago Fabrication 5 Gallon Gas Jug Holder","description":"\u003ch3\u003eRago Fabrication 5 Gallon Gas Jug Holder\u003c\/h3\u003e\n\u003cp\u003e\u003cspan data-contrast=\"auto\"\u003eThe Rago Fabrication 5 Gal Gas Jug Holder was designed for diverse mounting applications, but also for compatibility with Rago Fabrication, ADD Offroad, and DV8 Offroad molle panels. This is a perfect solution for mounting your gas jug in the truck bed, on your trailer, in a garage, or wherever else it’s needed. The carrier features multiple locations to run retention straps suitable for whatever brand jug you have. It features a durable lightweight aluminum construction, stainless steel mounting hardware, and is proudly made in the USA.\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559740\":276}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan data-contrast=\"auto\"\u003ePlease Note:\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-contrast=\"auto\"\u003e Jug straps not included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSecurely Stow Common 5 Gal Gas Jugs\u003c\/li\u003e\n\u003cli\u003ePerfect for Trucks, Trailers, Garages, \u0026amp; More\u003c\/li\u003e\n\u003cli\u003eCompatible with Rago, ADD Offroad, DV8 Offroad \u0026amp; other Molle Panels\u003c\/li\u003e\n\u003cli\u003eMultiple Strap Mount Locations\u003c\/li\u003e\n\u003cli\u003eDurable Lightweight Construction\u003c\/li\u003e\n\u003cli\u003eAluminum Construction\u003c\/li\u003e\n\u003cli\u003eStainless Steel Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC9905401NA.pdf?v=12865155642952853811\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47843127623834,"sku":"AC9905401NA","price":384.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-5-Gallon-Gas-Jug-Holder-2.png?v=1777059859"},{"product_id":"rago-fabrication-universal-clevis-mounted-whip-flag-holder","title":"Rago Fabrication Universal Clevis Mounted Whip Flag Holder","description":"\u003ch3\u003eRago Fabrication Universal Clevis Mounted Whip Flag Holder\u003c\/h3\u003e\n\u003cp\u003eRago designed a whip flag mount that enables you to mount a whip to an off-road bumper clevis d-ring mount. The mount can handle all sizes of whip flags, including lighted whips. It installs to any standard 1-inch thick Clevis D-ring mount with a 1-inch hole, and includes all necessary hardware. Constructed from\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"TextRun SCXW28558532 BCX0\" lang=\"EN-US\" data-contrast=\"auto\"\u003e\u003cspan class=\"NormalTextRun SCXW28558532 BCX0\"\u003ehigh-quality\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003esteel, it is then sandblasted and finished in a durable 2-stage hammer black powder coat finish. Installation is a simple bolt-on process, and these are made with pride in the USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor proper fitment the centerline of the hole in the clevis mount should extend past the face of the bumper. This allows the whip to extend upwards past the bumper.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan Accommodate all Size Whip Flags\u003c\/li\u003e\n\u003cli\u003eIncluded Bushings are Sized for a 1\" Thick Clevis Mount with 1\" Hole\u003c\/li\u003e\n\u003cli\u003eMounts to Standard D-Ring Clevis Mounts on Off-Road Bumpers\u003c\/li\u003e\n\u003cli\u003eStainless Steel Mounting Hardware\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ragofabrication.com\/cdn\/shop\/files\/Rago_InstallGuide_AC9905701NA.pdf?v=10980711999937511743\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":47843142271130,"sku":"AC9905701NA","price":104.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/files\/Rago-Fabrication-Universal-Clevis-Mounted-Whip-Flag-Holder-4.png?v=1777060845"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3148\/9434\/collections\/Rago_Fabrication.png?v=1775671061","url":"https:\/\/kraveautomotive.ca\/collections\/rago-fabrication.oembed","provider":"KRAVE Automotive","version":"1.0","type":"link"}