For more pictures than found below, please clink on this link and click on KR8 photo album!
KR8 4Runner full build picture album
Please contact the KRave KRew if you would like a quote to duplicate this build onto a different Tacoma, 4runner or a Tundra!
Please budget around $25,000 CAD plus taxes for parts and labour to duplicate the KR8.
Build list of the truck includes;
Elka 2.5" shock body with remote reservoirs and dual speed compression adjustment. Comes with extended travel front coil overs set at 3" of front lift and 1.5" of rear lift
SPC forged UCA's(upper control arms) with sealed ball joints and grease zerks
Front differential drop to reduce angles on CV angles
Antiseize lower control arm cam bolts
Sway away 1.5" rear lift springs
Yokohama Geolandar X-AT LT295/70R17 X4
SCS Ray10 17X8.5 -10mm 4.3 backspace 24 lbs X4
ET lug nuts in black
*custom wheel well work to clear 34" tires
Nitro 4.56 gears
Front differential clamshell bushing upgrade
Prinsu Designs Aluminum roof rack with black powdercoat, full length non drill style
Greenlane Aluminum rocker gaurds/side steps. No kick out, with top filler plate, 0 degree tilt. Black powdercoat
Greenlane Aluminum Stump front bumper with small grill guard. Black powdercoat.
Smittybilt X20 10,000 lbs winch with synthetic rope and Wireless remote function.
Factor 55 Hawse fairlead
Factor 55 flatlink expert
RCI Offroad Full length aluminum skid plates. Front engine, transmission, transfer case and fuel tank
Baja Designs squadron R sport lights with clear driving combo lens for both fog lights and ditch lights.
CBI ditch light brackets
Baja Designs 20" S8 light bar in amber with wide cornering lens
Xenondepot-HID and LED replacement light bulbs
TRD pro grill and black rear valence
Under the hood
Northstar battery pro series group 31M
ARB single compressor, inflator hose and inflator gauge