KR7 Build-2020 Toyota Tacoma TRD Offroad Auto DCSB Voodoo Blue


*This truck is sold and has a new owner, but we can build you another!


Please contact the KRave KRew if you would like a quote to duplicate this build onto a new or existing Tacoma, 4runner or a Tundra!  

Please budget around $20,000-21,000 CAD plus taxes for parts and labour to duplicate the KR7.

For more pictures than found below, please clink on this link and click on KR7 photo album!

KR7 Tacoma full build picture album

Build list of the truck includes;

Elka 2.5" IFP(internal floating piston) with extended travel front coil overs set at 3" of front lift and 2" of rear lift
SPC forged UCA's(upper control arms) with sealed ball joints and grease zerks  
New UCA bolts to save your truck body on install 
Front differential drop to reduce angles on CV angles
Antiseize lower control arm cam bolts
OME Dakar Medium rear leaf springs with 2" of lift
Extra grease applied to bushings and spring isolators
OME driveshaft carrier bearing drop kit
Yokohama Geolandar X-AT 35X12.50R17 X4
SCS SR8 17X8.5 -10mm 4.3 backspace 23 lbs X4
ET lug nuts in black
TPMS swap
*custom wheel well work to clear 35" tires
Smittybilt tire repair kit as this truck has a temporary use spare
Nitro 4.88 gears
Front differential clamshell bushing upgrade
Roof Rack
Prinsu Designs Aluminum roof rack with black powdercoat
Greenlane Aluminum rocker gaurds/side steps. No kick out, with top filler plate, 0 degree tilt.  Black powdercoat
Greenlane Aluminum Stump front bumper with small grill guard.  Black powdercoat.
Smittybilt X20 10,000 lbs winch with synthetic rope and Wireless remote function.
Factor 55 Hawse fairlead
Factor 55 flatlink expert
Warn D ring shackle
Morimoto XB Led fog lights.  DOT approved!








Leave a comment

Please note, comments must be approved before they are published